Recognize connection with anchors and crazyflie
Posted: Thu Mar 07, 2019 2:09 am
hello, guys
Recently i'm trying to get position values from 10 crazyflies.
I wanna get postion of 10 points(nodes) simultaneously.
With 6 anchors and single radio dongle, I did power on 10 cf2. but it seems that it's not connected.
One of the cf2 is connected. but other's not.
Here's LED State:
- 2 BLUE LED on(M2, M3)
- 1 RED LED Blinking(M1)
but there's no led blinking on lps deck.
I tried to change address like 0xE7E7E7E7E7 --> 0XE7E7E7E701. But it didn't work.
how can i use multi crazyflies with single radio and same anchors.
Recently i'm trying to get position values from 10 crazyflies.
I wanna get postion of 10 points(nodes) simultaneously.
With 6 anchors and single radio dongle, I did power on 10 cf2. but it seems that it's not connected.
One of the cf2 is connected. but other's not.
Here's LED State:
- 2 BLUE LED on(M2, M3)
- 1 RED LED Blinking(M1)
but there's no led blinking on lps deck.
I tried to change address like 0xE7E7E7E7E7 --> 0XE7E7E7E701. But it didn't work.
how can i use multi crazyflies with single radio and same anchors.