Unable to connect Crazyflie 2.0 with Crazyradio PA
Posted: Wed Mar 21, 2018 11:22 pm
Hi there,
I have installed cfclient-win32-install-2018.01.3.exe on my windows 10 PC and followed the steps mentioned at https://www.bitcraze.io/getting-started ... /#inst-win. In the Crazyflie PC client when I click the “Scan” button in the top left corner, it never discovers Crazyflie 2.0 drone. I checked the following list before asking help here -
(1) I tried with both Crazyradio PA drivers - libusb-win32 (v.1.2.6.0) and libusbK (v.3.0.7.0). In both cases, I am able to see Crazyradio PA USB dongle in windows device manager. (2) I can see LED displaying when I insert the Crazyradio dongle on the computer, it quickly blinks red/green upon insertion.
(3) When I click "Scan" button in PC client, I notice that red LED blinks every time in the Crazyradio dongle.
(4) I enabled ZMQ input in the config file
(5) I make sure that Crazyflie 2.0 is power-on and all LEDs are working perfectly when I do scanning on the PC client.
(6) I can see the drone on the PC the client, only if it is connected over USB. (7) I read these posts in the developer forum -
https://github.com/bitcraze/crazyflie-c ... issues/214
https://github.com/bitcraze/crazyflie-c ... issues/268
viewtopic.php?f=10&t=2530
(8) I got tried with the message INFO:cflib.crtp.radiodriver:v0.53 dongle with serial N/A found
looking for a quick solution. Thanks!!
I have installed cfclient-win32-install-2018.01.3.exe on my windows 10 PC and followed the steps mentioned at https://www.bitcraze.io/getting-started ... /#inst-win. In the Crazyflie PC client when I click the “Scan” button in the top left corner, it never discovers Crazyflie 2.0 drone. I checked the following list before asking help here -
(1) I tried with both Crazyradio PA drivers - libusb-win32 (v.1.2.6.0) and libusbK (v.3.0.7.0). In both cases, I am able to see Crazyradio PA USB dongle in windows device manager. (2) I can see LED displaying when I insert the Crazyradio dongle on the computer, it quickly blinks red/green upon insertion.
(3) When I click "Scan" button in PC client, I notice that red LED blinks every time in the Crazyradio dongle.
(4) I enabled ZMQ input in the config file
(5) I make sure that Crazyflie 2.0 is power-on and all LEDs are working perfectly when I do scanning on the PC client.
(6) I can see the drone on the PC the client, only if it is connected over USB. (7) I read these posts in the developer forum -
https://github.com/bitcraze/crazyflie-c ... issues/214
https://github.com/bitcraze/crazyflie-c ... issues/268
viewtopic.php?f=10&t=2530
(8) I got tried with the message INFO:cflib.crtp.radiodriver:v0.53 dongle with serial N/A found
looking for a quick solution. Thanks!!