Search found 83 matches
- Thu Apr 29, 2021 12:41 am
- Forum: Bitcraze
- Topic: PyQt question: Connect the X button to a function in a Tab
- Replies: 2
- Views: 1433
PyQt question: Connect the X button to a function in a Tab
I have a tab in the client that listens for data from a socket. When I close the client I cant get the Tab to shut down the socket. I have tried a number of ways to trigger a function on close but failing. Here is the closest example on stack overflow I can find. https://stackoverflow.com/questions/...
- Wed Apr 28, 2021 4:41 am
- Forum: Quadcopters
- Topic: Battery Advice
- Replies: 1
- Views: 1120
Battery Advice
I have a set of Turnigy Li Po 300mAh 20-40C batteries.
Is there any way of telling when they start to become dangerous?
A new battery measures around 8.18mm a used one (cannot tell you how long sorry) has swollen up to 8.74mm.
Cheers
Joe
Is there any way of telling when they start to become dangerous?
A new battery measures around 8.18mm a used one (cannot tell you how long sorry) has swollen up to 8.74mm.
Cheers
Joe
- Fri Apr 16, 2021 4:48 am
- Forum: Support
- Topic: flipping the motor direction in the firmware.
- Replies: 5
- Views: 2093
Re: flipping the motor direction in the firmware.
Well yes that makes a lot of sense Thanks for that!
- Mon Apr 12, 2021 11:25 am
- Forum: Lighthouse positioning system
- Topic: More than two basestations
- Replies: 1
- Views: 827
More than two basestations
Hi Kristoffer, As an extension problem to this post here. https://forum.bitcraze.io/viewtopic.php?f=20&t=4668&start=10 I will be getting the CF to look for more than two basestations. Following your advice from your call I increased the PULSE_PROCESSOR_N_BASE_STATIONS to 3, ran the CF and pe...
- Fri Mar 26, 2021 11:40 pm
- Forum: Lighthouse positioning system
- Topic: Using v2 lighthouses facing upwards
- Replies: 19
- Views: 5567
Re: Using v2 lighthouses facing upwards
Hi Kristoffer! My engineering friend Tim has worked on this problem for the last couple of weeks in his spare time. We are at the point where we would like you to review the work and see if there is anything obvious that might have been missed. His message Below: We’re trying to design and implement...
- Thu Mar 11, 2021 7:32 am
- Forum: Support
- Topic: flipping the motor direction in the firmware.
- Replies: 5
- Views: 2093
Re: flipping the motor direction in the firmware.
that does get the drone off the ground, but the yaw is uncontrollable. it spins really fast then crashes.
- Thu Mar 11, 2021 7:21 am
- Forum: Lighthouse positioning system
- Topic: Using v2 lighthouses facing upwards
- Replies: 19
- Views: 5567
Re: Using v2 lighthouses facing upwards
I tried again in our lab, clean install new drone. all works ok! So not sure what that was.
Just waiting now for my engineer friend to finalise the modifications to the before we move on to integrating it into the newest version of the Lighthouse Tab.
J
Just waiting now for my engineer friend to finalise the modifications to the
Code: Select all
class LighthouseBsGeoEstimator
J
- Thu Mar 11, 2021 4:54 am
- Forum: Support
- Topic: flipping the motor direction in the firmware.
- Replies: 5
- Views: 2093
flipping the motor direction in the firmware.
Hi, I am looking to reverse the direction of the motors such that the motors can be mounted upside down, but the chassis remains the same. From this old post https://forum.bitcraze.io/viewtopic.php?p=16079#p16079 Tobias flipped the signs in the powerDistribution function definition. I gave it a quic...
- Mon Mar 01, 2021 5:51 am
- Forum: Lighthouse positioning system
- Topic: Using v2 lighthouses facing upwards
- Replies: 19
- Views: 5567
Re: Using v2 lighthouses facing upwards
I can't even get the drone to fly with the latest pull, with unmodified firmware, client and cflib... So i will try to get it fly on a multi bs setup with hard coded geo/calib values first. Then we can talk about moving it over once the tab/lib and firmware is more stable and there are docs... Sould...
- Thu Feb 25, 2021 5:47 am
- Forum: Lighthouse positioning system
- Topic: Using v2 lighthouses facing upwards
- Replies: 19
- Views: 5567
Re: Using v2 lighthouses facing upwards
Hi Kristoffer, I checked out the latest version of the lighthouse positioning tab today in response to Tobias's battery test function blog post. It looks like the calibration and geometry data are no longer hard coded into the firmware? How do you define the origin now? I assume there is some docume...