Bitcraze Forums

Totally awesome! Fred you are my hero! Sorry but in my opinion it flys better than the PC client :D Tomorrow I will definitely root my S3 to fly via bluetooth :lol: But flying with the screen pads is still not recommended!!! Even so to fly with an empty phone akku :? I lost connection during the em...

Great Fred! I can't wait to try your app (if i'm back at home)! I want to do the same with the usb Ps3 controller and android app. (http://forum.bitcraze.se/viewtopic.php? ... +ps3#p1320)
If it's working as aspected it's time to root my S3

Is it possible to make the graphic used in the balancing tab a bit smaller? I generally control my flie from my laptop which only has an 800 px high screen, making it impossible to get to the buttons at the bottom to calibrate and start the test. Thanks for all your hard work on this feature! Yes, ...

WTF A speaking autopilot http://www.mikrokopter.de/ucwiki/VideoAbspielen?id=246

Some times the price of learning is high but never in vain. I have also need to learn hardly to check things twice, trust only with carefull and RTFM ! The support and obligingness of the Bitcraze Team is great! You hardly find it somewhere else. And don't forget you bought a development kit that fl...

Just as a small tip: Dont even bother trying to use barometer readings in bad weather. Had a small storm going on here yesterday and my barometer was reading +- 3 meters vs the +-0.3 meters I usually get. :shock: :lol: Thats so funny! The next step is that the CF says: " Don't fly! A storm is ...

Another short change note: - Progress-bars shows the condition with colors (red<=40, yellow<=60,green>60) BalancingTab_v1.2.JPG - Tests can be stopped with the Start/Stop toggle button - And last but not least the calibration values will be stored in the client (power cycle of the CF is now possibl...

NEW Tab design and propeller acceleration values will be displayed. BalancingTab_v1.1.JPG And DEBUG_PRINT() outs has a higher information level, too. MPU6050: M1 Condition:69% (X:0.84, Y:1.22, Z:0.83) [OK] MPU6050: M2 Condition:82% (X:0.80, Y:0.79, Z:0.73) [OK] MPU6050: M3 Condition:62% (X:0.83, Y:1...

hi DesTiny, after about 3 week and multiple crashes still with the first batch of propellers and motors I notived a tiny crack on one of the propellers, so I decided to change them use (again) your tool to find a good set. First I noticed that 2 of my old propellers where down to 25/30 percent, whi...

Thanks for sharing your experience! I've also noticed that when you have good balanced propellors, the crazyflie hovers better, makes less noise and operates longer on a full battery. Yes, the amazing thing is you really can hear the differences if the CF hovers with good balanced propellers. From a...