Search found 659 matches
- Tue Mar 15, 2022 1:26 pm
- Forum: AI-deck
- Topic: GAP8 JTAG semihosting
- Replies: 1
- Views: 8040
Re: GAP8 JTAG semihosting
Hi! For the semi-hosting it might be that the settings in the project is set for UART, have a look in the Makefile where the following should be seen: io=host In most of the code now we have io=uart instead, like in the GAP8 bootloader ( link ). For more information on using the GAP8 with JTAG I thi...
- Mon Mar 14, 2022 9:33 am
- Forum: AI-deck
- Topic: aideck bootloader
- Replies: 26
- Views: 73033
Re: aideck bootloader
I'm not sure, but I think so. Have a look in the directories in BUILD to see if you can find the flash.img file.
- Mon Mar 14, 2022 7:26 am
- Forum: AI-deck
- Topic: aideck bootloader
- Replies: 26
- Views: 73033
Re: aideck bootloader
Hi! This is the firmware image file that's built with the GAP8 toolchain. It's located in the BUILD folder, but exactly what directly depends on what OS you're using. Here's the two paths I have: BUILD/GAP8_V2/GCC_RISCV_FREERTOS/flash.img # For FreeRTOS builds BUILD/GAP8_V2/GCC_RISCV_PULPOS/flash.im...
- Fri Mar 11, 2022 7:33 am
- Forum: AI-deck
- Topic: wifi_jpeg_streamer example issues
- Replies: 10
- Views: 18518
Re: wifi_jpeg_streamer example issues
I'm not sure, but I think the flash command is only for UART flashing, which isn't possible via the JTAG connector on the AI-deck. I would recommend using our docker container for this. The following command will flash the bootloader/app on the ESP32 with the Olimex USB Tiny-H: docker run --rm -it -...
- Fri Mar 11, 2022 7:30 am
- Forum: AI-deck
- Topic: Logging GAP8/ESP32
- Replies: 6
- Views: 13111
Re: Logging GAP8/ESP32
Hi! The change was made because we needed a clean commit for production. We're currently finalizing a new batch of AI-decks where we've replaced the old WiFi streamer example with the new code (for both ESP32 and GAP8). Having the UART output on IO1 would risk creating incompatibilities with other d...
- Tue Mar 08, 2022 3:36 pm
- Forum: AI-deck
- Topic: AI-deck GAP8 WiFi bootloader
- Replies: 2
- Views: 9363
AI-deck GAP8 WiFi bootloader
Hi all! We've been working a bit on the infrastructure for the AI-deck in order to make it a bit easier to use. One part of this work has been a GAP8 bootloader. The long term goal is to integrate this into the existing infrastructure of make cload and the python client deck updates. We're not there...
- Tue Mar 08, 2022 3:09 pm
- Forum: AI-deck
- Topic: wifi_jpeg_streamer example issues
- Replies: 10
- Views: 18518
Re: wifi_jpeg_streamer example issues
Hi! I've run into this issue, if I remember correctly it was when I bumped the SDK version where this file isn't included in the build. Could you double check that you're using the 3.8.1 version and also make clean before building? We've updated the examples today, so depending a bit on what you wan...
- Wed Feb 09, 2022 8:43 am
- Forum: Quadcopters
- Topic: Cutting the CF PCB
- Replies: 1
- Views: 8781
Re: Cutting the CF PCB
Hi!
Yes, cutting here will not break the board. There's no traces along the wings after the LED, only ground plane.
Yes, cutting here will not break the board. There's no traces along the wings after the LED, only ground plane.
- Mon Jan 24, 2022 12:35 pm
- Forum: AI-deck
- Topic: Logging GAP8/ESP32
- Replies: 6
- Views: 13111
Re: Logging GAP8/ESP32
The easiest/quickest way to do this is to connect a USB-to-serial dongle to either the ESP32 UART or the GAP8 UART on the expansion connector (during development I've had two dongles, one for each). For the ESP32 the only option right now is to get the UART on IO1 on the expansion connector, unfortu...
- Tue Dec 21, 2021 1:34 pm
- Forum: AI-deck
- Topic: Question about demosaicing alogrithm
- Replies: 3
- Views: 9203
Re: Question about demosaicing alogrithm
Could you try to using this Ptyhon script on the raw image instead? This will use openCV to do the demosaicking. Do you get the same result? import numpy as np import cv2 img = np.fromfile("img.raw", dtype=np.uint8) print(img.size) img.shape = (244, 324) rgb = cv2.cvtColor(img, cv2.COLOR_B...