Bitcraze Forums

Hi,

Sorry to hear about the switch. You could just short it like jweather does or have a look at this page on the wiki, order a new one and replace it.

/Marcus

Hi, Thanks for the info. Is this info on the wiki somewhere? Otherwise I'll add it to some page. (On a related note I've just updated the OSX installation instructions, hopefully making them better.) Thanks for updating the OSX instructions! Since we don't have access to a Mac we need some help when...

Hi Jean-Marie, No, this has no effect at all. It's a misspelling of stabilizer in the file conf/log/stabalizer.json and this will result in the plot tab not working correctly. Since the plot tab doesn't work very well anyways then this won't really affect anything. It's hard to get the Crazyflie to ...

Hi, You could also try to change the channel. This will especially help if you have a wifi operating on the same range as the Crazyflie radio. The same goes for the speed. If you set it to 250kbit/s you will get good range outside but inside (where there are normally wifi/bluetooth and other 2.4 GHz...

Hi, With the accelerometer/gyro we think that it's not possible to get a position hold. The regulation should keep the platform level (if you set roll/pitch to 0/0) but turbulence, vibrations etc will cause this to be slightly off. If the platform is drifting slowly to the sides there's no way to de...

Hi, Glad to hear that you have it flying! It's a bit hard to get flying in the beginning we are working on a tips and tricks page but we still haven't had the time to add any information :cry: Did you try flying it inside? Since the Crazyflie is so light it will be affected by the wind outside and t...

Great that you got it fixed! It looked a bit hard to fly in the video

Hi,

For the first question you can have a look at this thread for some tips on how to get going on Mac.

For more information on the FPV test we did you have have a look at this post or for the master thesis on adding a camera you can have a look at this post.

/Marcus

Hi, Good tips and instructions! Hopefully this will help somebody else... I would love to see this documented better on the wiki We created a page on the wiki for tips and tricks on flying but we haven't had the time to fill it out properly. If you want to help out with the instructions then drop me...

Hi, When plugged directly to the device the radio LEDs turned on and stayed on, and the OS log gave the generic "unable to enumerate USB device on port #" linux USB device error. It might be this issue that is described here even though it's not USB3. Any chance you could try and update to...