Bitcraze Forums

Hello, So I have build a bigger drone with the bigquad and am having some issues with it being rather unstable. The vales for the roll and pitch will be constantly changing (usually increasing) when the drone is on the table. When running the python example for the multiranger_push Does not hold pos...

That totally worked! Thank you!

Hello tobias, Thank you so much for all the help. We are using a desktop supply voltage. We can set it as high as 12V and currently its set to 6V. That is going to a BEC that drops it down to 5V and that goes to the BQ Deck. We've checked the voltage from the BEC and it is 5V. This seems to me that ...

Hello Tobias, Thank you so much. It looks like after not touching it for a while, it appears to work. Although with the BigQuad deck connected, its not enough to power the Crazyflue even though we have 5V going through the BQ. It no longer gets hot now (maybe the first time there was something wrong...

Hello arnaud,

Thank you so much! Just wanted to update this in case anybody was looking at it after. Turns out the OW that we bought were bad. We bought some new ones (exact same ones) and was able to do the process of programming it without an issue.

Thank you!

Hello arnaud,

I am extremely sorry for how late this is! It looked like the OW that was bought was bad (not sure how, maybe just bad luck haha). We bought some new ones and we were able to program it.

Thanks!

Hello,

I connected my BigQuad to my Crazyflie and connected it to a power supply (5 V). The Crazyflie turned on and all lights were blue. But now it will not turn on and I only get 1.7 V from the VCC pin. Any ideas? Thank you so much!

Thanks,
Lucas

Hey everyone, so I have this thread that talks about the one wire and trying to program it. However, I am having an issue with it, where it is not being found. I don't know if its a issue with the code, the device or the component. The component is brand new, out of the box. Any advice would be awes...

So just in case anyone tries doing what we are trying to do, here is some info for the future. Please correct me if I am wrong. After talking to some more people and searching a bit I've found this. You can force the deck to load. Here is an example of a deck build: How to Build A Deck Even though t...

Hello everyone, We are building a custom deck that closely resembles the Z-Ranger for some research purposes. We were trying to write to the one wire (DS28E05) and are having some issues. Do we need to write to the one wire since it resembles the Z-Ranger? (We are hoping to add more components to th...