Search found 601 matches

by marcus
Fri May 13, 2016 11:06 am
Forum: General discussions
Topic: Kinect on Vbox bitcraze 0.8
Replies: 1
Views: 1450

Re: Kinect on Vbox bitcraze 0.8

Hi Björn, I would say that this will be hard to get working in the VM. First the USB bandwidth isn't great and secondly you won't have access to any graphics accelerated things (like OpenCL) which will make it slow. I would try to get it working natively instead. You can run the detector using the K...
by marcus
Thu May 12, 2016 9:46 am
Forum: Bitcraze
Topic: Crazyflie 2.0 Model/STL files
Replies: 17
Views: 12162

Re: Crazyflie 2.0 Model/STL files

Thought I'd share again :) Here's a sketchup model of the crazyflie 2.0 I've been working up for a 3D printed frame design of mine. The board shape is accurate (based on the board online in the repository), the electronic bits on the board are based on my rough measurements, and only those bits tha...
by marcus
Wed Mar 30, 2016 9:33 am
Forum: Support
Topic: Motorscontinue running
Replies: 5
Views: 2502

Re: Motorscontinue running

Hi,

Ok we will have a look at it.
by marcus
Wed Mar 30, 2016 9:32 am
Forum: Support
Topic: [SOLVED]cfheadless
Replies: 12
Views: 5071

Re: cfheadless

If you connect to the Crazyflie, go to the about box in the client and switch to the debug tab. This will show you information about the client and the firmware versions.
by marcus
Wed Mar 23, 2016 10:31 am
Forum: Support
Topic: Motorscontinue running
Replies: 5
Views: 2502

Re: Motorscontinue running

Are you running the latest revision of the client/firmware or is it the latest release? We're working on pushing out a new release for the client, but the best would be if you could clone it from GitHub and test the latest revision and see if you still have the same issue.

Best regards,
Marcus
by marcus
Wed Mar 23, 2016 10:26 am
Forum: Support
Topic: [SOLVED]cfheadless
Replies: 12
Views: 5071

Re: cfheadless

Hi,

I'm note sure about the __init__ in Python 3. But it's best to start from the latest revision on the develop branch in the repository. The version 2015.09 is a bit old and lots of things have changed.
by marcus
Thu Mar 17, 2016 2:11 pm
Forum: Developer Discussions
Topic: OpenOCD and JLINK
Replies: 3
Views: 2362

Re: OpenOCD and JLINK

Thanks! The code is merged.

Yeah, it would be great to document it somewhere. I think the second link looks good, since it has lots of information on how to build (it will require to edit the config.mk).
by marcus
Wed Mar 16, 2016 10:50 am
Forum: General discussions
Topic: [SOLVED] Cannot find a Crazyradio Dongle
Replies: 5
Views: 5025

Re: Cannot find a Crazyradio Dongle

Hi!

Is all the code up to date, or do you have older changes that's mixed in with the new code? It could be an issue with libusb and we've made some changes there a while ago.
by marcus
Wed Mar 16, 2016 10:44 am
Forum: Support
Topic: Motorscontinue running
Replies: 5
Views: 2502

Re: Motorscontinue running

Hi Jean-Claude,

Do you get this error when flying with altitude hold or without?

Best regards,
Marcus
by marcus
Wed Mar 16, 2016 10:42 am
Forum: Support
Topic: [SOLVED] glue on motors mounts.
Replies: 6
Views: 2887

Re: glue on motors mounts.

Hi Jean-Claude,

We've never tried gluing on the motor mounts, so I can't recommend a glue for it. But the motor mounts are made from PP plastic, so your best bet is to find a glue what work well on that.

Best regards,
Marcus