Search found 601 matches

by marcus
Fri Nov 10, 2017 10:04 am
Forum: Support
Topic: Cannot turn crazyflie 2.0 off
Replies: 2
Views: 1726

Re: Cannot turn crazyflie 2.0 off

Hi, It sounds like you have entered bootloader mode. You should be able to turn on/off the Crazyflie 2.0 by pressing the power button with a click, if you hold it down for 3 seconds or more while powering it on you will enter bootloader mode and the M2 and M3 LEDs will blink. If you're still not abl...
by marcus
Mon Nov 06, 2017 2:05 pm
Forum: Bitcraze
Topic: crazyflie programming where>start?
Replies: 4
Views: 2123

Re: crazyflie programming where>start?

Thanks for the feedback, I agree that there's improvements to be made. i got the python client which runs great took ages to get setup but finally got the figure of 8 thanks. Did you run the example from the Bitcraze VM or did you install the library nativ? i did follow and complete the getting star...
by marcus
Mon Nov 06, 2017 1:46 pm
Forum: Developer Discussions
Topic: python client keyboard control
Replies: 4
Views: 2135

Re: python client keyboard control

I was a bit quick and misunderstood the question, now I understand what you want to do :-) One issue is that you have to call the command command at least 2 times per second which I'm not sure you will be able to do using your code. I think that the event loop will lock until you press a key. Or? If...
by marcus
Mon Nov 06, 2017 12:51 pm
Forum: Developer Discussions
Topic: python client keyboard control
Replies: 4
Views: 2135

Re: python client keyboard control

Hi! The script you are trying to use requires the Flow deck for velocity control. Are you using the Flow deck? If you just want to control the Crazyflie from a terminal using a joystick I would recommend using the headless client that is in the crazyflie-clients-python repository : $ bin/cfheadless ...
by marcus
Thu Jun 15, 2017 8:49 am
Forum: Bitcraze
Topic: [SOLVED] 50 % more on my bill with shipping and taxes
Replies: 4
Views: 2311

Re: 50 % more on my bill with shipping and taxes

Hi Jean-Claude, I am sorry that this caused problems for you. When you buy from the Bitcraze store the goods are sent from Hong Kong. This means that when it arrives in France it is subject to VAT plus potential import duties (as stated when ordering). Unfortunately the shipping for the Crazyflie 2....
by marcus
Tue Jan 24, 2017 7:03 am
Forum: Developer Discussions
Topic: Crazyflie 2 battery charger
Replies: 7
Views: 2845

Re: Crazyflie 2 battery charger

Nice build! We've never actually put the side-by-side before so thanks for the feedback on the width. I've added an issue for the hardware so if we make a new revision we will try to slim down the board.
by marcus
Mon Jan 16, 2017 3:21 pm
Forum: Developer Discussions
Topic: Crazyflie 2 battery charger
Replies: 7
Views: 2845

Re: Crazyflie 2 battery charger

Hi,

I've just created a page on the wiki with the layout, schematic and a few pictures of the charger we built for our lab. Each charger will charge at most 500mA so if you can supply 5A you should be good. Don't forget to check the max rating of the connectors.

Let us know how it turn out!
by marcus
Wed Nov 09, 2016 9:35 am
Forum: Developer Discussions
Topic: Hover implementation
Replies: 4
Views: 2364

Re: Hover implementation

Hi,

You can add multiple logging configurations and you can start and stop them. It's not possible to do "one-shot" logging, but you can set up a logging configuration and when you get the first value back stop it.
by marcus
Mon Oct 24, 2016 11:39 am
Forum: Developer Discussions
Topic: LPS node failed to set dtr/rts
Replies: 8
Views: 9620

Re: LPS node failed to set dtr/rts

Since the DFU is working and the log from production shows output from the UART I think it's a firmware issue. It might be something wrong in the EEPROM, do you have the toolchain set up? If so then do one build where you call this function to write a default configuration to the EEPROM?
by marcus
Mon Oct 24, 2016 11:29 am
Forum: Developer Discussions
Topic: Need Help to control crazyflie 2.0 polling pitch,yaw,roll
Replies: 14
Views: 6259

Re: Need Help to control crazyflie 2.0 polling pitch,yaw,roll

Yes, you can either call stop() on the log configuration or delete() on it. The difference is that if you call stop on the log configuration it is still present in the Crazyflie 2.0 but the data stop coming. If you call delete it is removed (and the data stopps coming). There's a limited amount of l...