Search found 659 matches
- Tue Apr 26, 2022 1:39 pm
- Forum: AI-deck
- Topic: Problems with AI deck and bootloader
- Replies: 4
- Views: 10787
Re: Problems with AI deck and bootloader
Hi! Ok, let's see if we can fix this. Here's a few questions just to double check: Did you successfully flash the GAP8 bootloader via JTAG? Are you flashing your application via WiFi or the Crazyradio PA? Can you try to re-flash it again to see if you reach 100% and it works then? Have you run the a...
- Tue Apr 26, 2022 1:30 pm
- Forum: AI-deck
- Topic: CPX Stalls
- Replies: 10
- Views: 19620
Re: CPX Stalls
Thanks for the code. I've started implementing some load testing, but it's not good enough yet, so having a way to trigger this is good.
- Tue Apr 19, 2022 9:08 am
- Forum: AI-deck
- Topic: aideck bootloader
- Replies: 26
- Views: 74278
Re: aideck bootloader
If you have the latest version of the crazyflie-python-lib you should be able to bootload the GAP8 via the Crazyradio PA using the following command (substituting the radio address for the one you use): cfloader flash BUILD/GAP8_V2/GCC_RISCV_FREERTOS/target.board.devices.flash.img deck-bcAI:gap8-fw ...
- Tue Apr 12, 2022 8:18 am
- Forum: AI-deck
- Topic: CPX Stalls
- Replies: 10
- Views: 19620
Re: CPX Stalls
Thanks for reporting this. We haven't tested this use-case yet, but I'll try to get the time to do it so we can debug it.
- Tue Apr 12, 2022 8:06 am
- Forum: AI-deck
- Topic: wifi_jpeg_streamer example issues
- Replies: 10
- Views: 19441
Re: wifi_jpeg_streamer example issues
Could it be that the WiFi is not being set up? Either you need to tell the Crazyflie to do this (by using make menuconfig) or the GAP8 test program by setting SETUP_WIFI_AP=1 when building (make sure to do make clean first just in case).
- Tue Apr 12, 2022 8:03 am
- Forum: AI-deck
- Topic: aideck bootloader
- Replies: 26
- Views: 74278
Re: aideck bootloader
Good to hear that it's working.
The reason for the two windows is that one is raw and the other one is colorized.
Unfortunately the test program will only exit on Ctrl+C in the console.
The reason for the two windows is that one is raw and the other one is colorized.
Unfortunately the test program will only exit on Ctrl+C in the console.
- Thu Apr 07, 2022 7:33 am
- Forum: AI-deck
- Topic: aideck bootloader
- Replies: 26
- Views: 74278
Re: aideck bootloader
Ok, thanks for the update. So just to make sure, you're using the toolbelt for the ESP32 (as described above) and you get an error when programming? Are you using the Olimex ARM-USB-TINY-H programmer? The reason I'm asking is that I'm using the toolbelt to build/flash the ESP32 and I'm not seeing th...
- Wed Apr 06, 2022 9:16 am
- Forum: AI-deck
- Topic: aideck bootloader
- Replies: 26
- Views: 74278
Re: aideck bootloader
Are you using the docker container for flashing the ESP or are you using a local installation?
- Mon Apr 04, 2022 10:51 am
- Forum: General discussions
- Topic: Send Data From Crazyflie to Simulink with ZeroMQ
- Replies: 9
- Views: 16601
Re: Send Data From Crazyflie to Simulink with ZeroMQ
I'm not sure what the problem might be. I'm running the latest commit of the client and the cf-lib. I also tried to pip install the library, version cflib-0.1.18.1 and this also works. It looks strange since when I tried to uninstall the cflib to try to replicate the problem, I get errors about crtp...
- Thu Mar 31, 2022 6:26 am
- Forum: General discussions
- Topic: Send Data From Crazyflie to Simulink with ZeroMQ
- Replies: 9
- Views: 16601
Re: Send Data From Crazyflie to Simulink with ZeroMQ
Hmm, looks like it can't find the CF lib. Do you have it installed? Can you run the normal client?