Search found 1050 matches
- Wed May 25, 2022 1:13 pm
- Forum: Developer Discussions
- Topic: Book recommendations for Crazyflie specific topics
- Replies: 8
- Views: 35781
Re: Book recommendations for Crazyflie specific topics
I would agree indeed. And ofcourse applying it in your project. Doing is better then reading :) By the way, this seem like an interesting topic to continue but I would recommend anybody that would like to further respond to this, copy the link of this thread and continue the dicussion on our new sup...
- Wed May 25, 2022 7:44 am
- Forum: AI-deck
- Topic: Issue with new wifi-img-streamer example
- Replies: 12
- Views: 61672
Re: Issue with new wifi-img-streamer example
Thanks for your update! There are still improvements to be done but hopefully with more feedback, contributions and work this will improve. By the way, as you see here above, we are moving support to a different platform, namely github discussions (https://discussions.bitcraze.io/). If you are still...
- Wed May 25, 2022 7:43 am
- Forum: AI-deck
- Topic: AI-deck firmware configuration
- Replies: 1
- Views: 8258
Re: AI-deck firmware configuration
You would need to read the datasheet of the nina module for this. The nina module is a casing aroung an ESP module, and some pins are rewired.
- Wed May 25, 2022 7:42 am
- Forum: AI-deck
- Topic: AI-deck Nina W10 interface drivers
- Replies: 1
- Views: 8412
Re: AI-deck Nina W10 interface drivers
Hi! As we don't know much about your current configuration of your AIdeck, we are not sure how we can help you in this sense. About using greenwaves' nina driver or ours with CPX, ours will enable over-air flashing and easier communication between CPUs, which are four with the crazyflie included. It...
- Wed May 25, 2022 7:00 am
- Forum: AI-deck
- Topic: how can i make gap_tools
- Replies: 3
- Views: 9351
Re: how can i make gap_tools
this error is the key 'Error: unable to open ftdi device with vid 15ba, pid 002b, description 'Olimex OpenOCD JTAG ARM-USB-OCD-H', serial '*' at bus location '*' Your programmer is a different type, so you would need to export the right version for your programmer according to greenwaves instruction...
- Wed May 25, 2022 6:56 am
- Forum: Support
- Topic: crazyradio PA connect issue
- Replies: 8
- Views: 94395
Re: crazyradio PA connect issue
The error says that it can not find the crazyradio, which is quite clear fault. Have you selected the crazyradio usb device in your virtual machine, like this? It's device>USB>Bitcraze Crazyradio PA USB dongle (there should be a check there)
- Tue May 24, 2022 8:22 am
- Forum: Autonomous flight
- Topic: Swarm Python not working as expected
- Replies: 3
- Views: 36841
Re: Swarm Python not working as expected
@tharunkumar_a1 Please start a new thread for your problem as you are not the original poster and your problem is not related to this thread. Just a notice, we are on our way to transfer to github discussions, so you can also start the thread there is you want to: https://github.com/orgs/bitcraze/di...
- Mon May 23, 2022 6:43 am
- Forum: Support
- Topic: crazyradio PA connect issue
- Replies: 8
- Views: 94395
Re: crazyradio PA connect issue
Hi! We noticed that some were having performance issues with the VM, especially manifesting in the connection time with the Crazyradio. So that is why I added some extra performance enhancing tips for the VM here: https://github.com/bitcraze/bitcraze-vm#optimizing-for-use See if you can increase you...
- Mon May 23, 2022 6:31 am
- Forum: AI-deck
- Topic: how can i make gap_tools
- Replies: 3
- Views: 9351
Re: how can i make gap_tools
There is a bug for Facedetection example in the gap sdk: https://github.com/bitcraze/aideck-gap8-examples/issues/92 It will only work for SDK 3.8+ , and there you will not be able to use CPX unfortunately... And in SDK version 4+ the make gap_tools has disappeared. We are currently thinking of a sol...
- Mon May 23, 2022 6:28 am
- Forum: Bitcraze
- Topic: New Crazyflie 2.1 -- how to use with Mac?
- Replies: 2
- Views: 9358
Re: New Crazyflie 2.1 -- how to use with Mac?
The getting started tutorial should have also pointed you to the Mac install instructions: https://www.bitcraze.io/documentation/t ... yflie-2-x/