hi!
Do you see this happening if you are flashing on RAM (make run) or if you are flashing it on the flash memory (make flash) ?
Search found 1050 matches
- Thu Jun 24, 2021 9:06 am
- Forum: AI-deck
- Topic: Camera stream upside down
- Replies: 8
- Views: 2479
- Tue Jun 22, 2021 9:18 am
- Forum: General discussions
- Topic: Crazyflie 2.1 is not able to take off
- Replies: 5
- Views: 1990
Re: Crazyflie 2.1 is not able to take off
Ah oke! If the very first video was shot when you were giving full thrust through the app, that is indeed not what you are supposed to see. I find it quite difficult to control the drone through the app but at least it should do a hop in the air. Do you have a controller so you can try it from the c...
- Tue Jun 22, 2021 6:53 am
- Forum: External positioning systems
- Topic: How to set the default filter be kalman filter?
- Replies: 9
- Views: 14104
Re: How to set the default filter be kalman filter?
In the console screenprint, it seems that you are not on the latest master or the latest release of the crazyflie firmware. So let's see first if that is the cause. Go ahead and update to the latest clean release (2021.03) via these instructions . After that (let's do without any decks), you can cha...
- Tue Jun 22, 2021 6:44 am
- Forum: General discussions
- Topic: Propeller guard for Crazyflie 2.1
- Replies: 2
- Views: 1333
Re: Propeller guard for Crazyflie 2.1
We don't sell anything ourselves but if you have a 3d printer you can find some nice designs on the web!
Like this forum post: viewtopic.php?t=1762
Or this design on shapeways: https://www.shapeways.com/product/5D5UF ... prop-guard
Like this forum post: viewtopic.php?t=1762
Or this design on shapeways: https://www.shapeways.com/product/5D5UF ... prop-guard
- Mon Jun 21, 2021 10:49 am
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 3919
Re: Client cannot connect to the Crazyflie
ah sorry, i think the misunderstanding was from my part! The steps that you describe seems to be correct. If you flash the crazyflie in coldboot, and it restarts, you can not click the restart in firmware mode because the crazyflie is no longer connected to the crazyflie. The post before last one, y...
- Mon Jun 21, 2021 10:35 am
- Forum: General discussions
- Topic: Crazyflie 2.1 is not able to take off
- Replies: 5
- Views: 1990
Re: Crazyflie 2.1 is not able to take off
Hi! Yes as wydmynd recommended, it is always handy to have a console tab so thanks for that! For in the future, also mention which decks you are attaching to the crazyflie as well! But luckily there was a picture. So in the console tab, you see the following: DECK_CORE: 0 decks found This should sta...
- Mon Jun 21, 2021 10:20 am
- Forum: Developer Discussions
- Topic: During swarming, some crazyflies crash or unbalanced at the same time.
- Replies: 5
- Views: 1716
Re: During swarming, some crazyflies crash or unbalanced at the same time.
Alright! That is good to know. So probably you based your script on the hl-commander-swarm.py or synchronizedSequence.py ? If you still have anywhere in the python script where you use activate_mellinger_controller, either comment it out or put it to False. Then try to fly again and see if it improv...
- Mon Jun 21, 2021 10:14 am
- Forum: External positioning systems
- Topic: How to set the default filter be kalman filter?
- Replies: 9
- Views: 14104
Re: How to set the default filter be kalman filter?
Hi! Let me just jump in here! Kristoffer means exactly that, no decks are there is no flowdeck and multiranger attached. You can check out which values the parameters have by looking at the parameter tab. Here are some instructions how to use the parameter tab. . Kristoffer most likely first ran the...
- Mon Jun 21, 2021 10:01 am
- Forum: Support
- Topic: Using micro-SD deck with flowdeck V2
- Replies: 7
- Views: 2835
Re: Using micro-SD deck with flowdeck V2
Hi!
In the github issue I referred to in the last post, it mentioned that this bug has now been resolved. So LPS deck now works with the Usddeck without the necessity of changing the port.
In the github issue I referred to in the last post, it mentioned that this bug has now been resolved. So LPS deck now works with the Usddeck without the necessity of changing the port.
- Mon Jun 21, 2021 9:59 am
- Forum: Support
- Topic: Hardware all properly set up but lighthouse deck not being initialized
- Replies: 13
- Views: 3222
Re: Hardware all properly set up but lighthouse deck not being initialized
For the v1's, you just need to set them in the right mode, which can be found in the instructions if you click the 'v1 base station' tab. Technically, for physicall setting them up it is exactly the same. You can either use a tripod like in the video, or use a wall mount. HTC vive has some [more set...