Bitcraze Forums

Hi, phiamo has done some work with the pressure sensor, you can have a look at this post for more info and code. For changing the PID settings you can use the parameter tab. Just change parameters and press the Send values button. Just be careful and make small changes. New values can drastically ch...

The motor mounts seem to offer natural reinforcement but perhaps they can be extended in the next iteration (CFv2 :D ) to a wider position on the board. That's a good idea. The problem might be that whatever method you use to repair the wing will probably make it a bit thicker, thus stopping the mo...

I tested on both binary (cflie-2013.4.bin) and self-build(hg pull && hg update -C 2013.4 && make CLOAD=1 DEBUG=0). Both of them can't connect to client. Finally, I restore firmware back to cflie_ProductionV2.bin and CF can back to normal again. When you say that the Crazyflie cannot...

Another method (if you don't have access to velcro tape) is using a small rubber band like this:
/Marcus

Nice guide! Improved plot functionality is planned, we are working on it but it's not ready yet.

/Marcus

Have a look at these instructions by Patrick for configuring the PS3 controller with MotionJoy.

/Marcus

Great! Happy flying!

Have a nice weekend.

/Marcus

Hi Johnson,

Did you download the binary you are trying to flash from our Bitbucket or did you build it yourself?

/Marcus

Hi Daniel, I was wondering if the USB3 problem is solved already? If yes how can i update the firmware of the crazy radio when it is not ackknowledged by the system? Yes, the problem has been solved but there's still no binary uploaded. Have a look at this page for building and this for flashing. As...

Great guide Patrick!! If you would like to put in on the wiki I can set you up with an account, just drop me a mail at <mynick>@bitcraze.se with the user name you want.

/Marcus