It is possible to flash it with a JTAG dongle but that is the only "wired" flashing supported now and I guess you don't have one?
Can you try to connect to the bootloader again and print the output from the command prompt here?
Search found 2338 matches
- Fri May 31, 2013 9:03 am
- Forum: Support
- Topic: Connection problem after flashing the firmware
- Replies: 9
- Views: 6646
- Fri May 31, 2013 8:32 am
- Forum: General discussions
- Topic: CF without PC
- Replies: 3
- Views: 3582
Re: CF without PC
#2 is still under development but hopefully soon it will work. http://forum.bitcraze.se/viewtopic.php?f=10&t=180#p1090
- Fri May 31, 2013 8:28 am
- Forum: Support
- Topic: [SOLVED] Crazyflie cannot fly, ERROR! Older timer found
- Replies: 5
- Views: 4493
Re: Crazyflie cannot fly, ERROR! Older timer found
I think it might be software mismatch. Can you try updating to the most recent versions.
Also make sure the red led is blinking about 2 times a second. That means it is calibrated and ready to fly. If it is only blinking once a second it is not calibrated and won't fly.
Also make sure the red led is blinking about 2 times a second. That means it is calibrated and ready to fly. If it is only blinking once a second it is not calibrated and won't fly.
- Fri May 31, 2013 8:02 am
- Forum: Support
- Topic: [SOLVED] Problem with the Crazyflie
- Replies: 36
- Views: 22806
Re: Problem with the Crazyflie
This is very strange. File "../cflib/bootloader/cloader.py", line 171, in updateInfo cpuid = struct.unpack("B"*12, pk.data[10:]) struct.error: unpack requires a string argument of length 12 It indicates that it managed to connect to the bootloader but doesn't get the right inform...
- Fri May 31, 2013 7:55 am
- Forum: Support
- Topic: MPU6050: Self test acc Y [FAIL] - motor problem?
- Replies: 48
- Views: 35261
Re: MPU6050: Self test acc Y [FAIL] - motor problem?
Wow, didn't really expect it to work, cool!Thanks Tobias, this solution worked at least for me
Can you also report back if it is flying as before and especially when hovering?
- Fri May 31, 2013 7:50 am
- Forum: Support
- Topic: Connection problem after flashing the firmware
- Replies: 9
- Views: 6646
Re: Connection problem after flashing the firmware
It is not possible to overwrite the bootloader so you should be able to flash it again. It seams there is a corrupt FW in the crazyflie that's why the leds go out. Can you try: * Restart the cf-client. Sometimes it seem to help. * Make sure to run the Crazyflie from the battery when you power it up ...
- Fri May 31, 2013 7:34 am
- Forum: Developer Discussions
- Topic: Leap Motion
- Replies: 8
- Views: 6481
Re: Leap Motion
Leap Motion + Crazyflie = Awesome!
If it is possible to make the Leap motion device work as a normal joystick driver and make it report 4 analog axis values it should be possible to map it directly in the cf-client.
Another way is to make use of the cflib.
If it is possible to make the Leap motion device work as a normal joystick driver and make it report 4 analog axis values it should be possible to map it directly in the cf-client.
Another way is to make use of the cflib.
- Fri May 31, 2013 7:15 am
- Forum: Developer Discussions
- Topic: 10DOF model sensors
- Replies: 25
- Views: 21076
Re: 10DOF model sensors
Great work Anton, I'm looking forward of trying it out! Some thoughts. I'm actually thinking the battery wires and connector are the biggest cause of the dynamic magnetic field distortion. The motors are already so magnetized that the electric magnetization shouldn't do much of a difference. The mot...
- Thu May 30, 2013 1:47 pm
- Forum: General discussions
- Topic: Crazyflie broken arm fix - 3d print
- Replies: 3
- Views: 4007
Re: Crazyflie broken arm fix - 3d print
I have put up another way that works pretty well to fix broken PCB arms in the troubleshooting section.
- Thu May 30, 2013 1:43 pm
- Forum: Developer Discussions
- Topic: Mode Switch and PID Tuning
- Replies: 8
- Views: 20571
Re: Mode Switch and PID Tuning
Great explaining pHysiX!
One cool and great thing would be if we could make the values auto adjust to the propeller balancing test.
One cool and great thing would be if we could make the values auto adjust to the propeller balancing test.