Search found 2338 matches

by tobias
Wed Jun 05, 2013 8:20 am
Forum: Support
Topic: Led's not as described in Wiki
Replies: 8
Views: 5892

Re: Led's not as described in Wiki

I'm guessing the green led is broken. Have you tried connecting to it?
by tobias
Wed Jun 05, 2013 7:42 am
Forum: Support
Topic: [RE-OPEN] Broken firmware problem
Replies: 18
Views: 12301

Re: [RE-OPEN] Broken firmware problem

It looks like the IDC10 cable has a 2.54mm pitch, but you need a 1.27mm pitch. The pin-out seems correct though so the question is if there is an adapter available. Most adapters I can find are from ARM 20-pin 2.54 pitch to ARM 10-pin 1.27mm so if you can't find an adapter I would cancel the order a...
by tobias
Tue Jun 04, 2013 1:53 pm
Forum: Support
Topic: Trouble flashing firmware
Replies: 12
Views: 10457

Re: Trouble flashing firmware

I sent you a PM Blondie63
by tobias
Tue Jun 04, 2013 1:48 pm
Forum: Support
Topic: Can't connect to radio via x86 windows 7 usb2
Replies: 4
Views: 4084

Re: Can't connect to radio via x86 windows 7 usb2

If the Crazyradio doens't blink with the red led when you press the connect button somthing isn't fully working with the driver. Have you tried connecting to it with the VM?
by tobias
Tue Jun 04, 2013 1:45 pm
Forum: Support
Topic: Too many packets lost error
Replies: 47
Views: 37635

Re: Too many packets lost error

Is the distance making a big difference? If you connect to it just beside the Crazyradio or 10m away? It could be because of this issue. We have also seen a case of a bad quality duck antenna. If it makes no big difference with or without the Crazyradio antenna it could be that.
by tobias
Tue Jun 04, 2013 1:29 pm
Forum: General discussions
Topic: What is the right RF channel?!
Replies: 1
Views: 3437

Re: What is the right RF channel?!

Well, it depends if you wan't to follow your nations regulations or not ;) You will hovever have very little chance of other ratio interference above channel 100.
by tobias
Tue Jun 04, 2013 1:06 pm
Forum: Support
Topic: [SOLVED] Problem with the Crazyflie
Replies: 36
Views: 22617

Re: Problem with the Crazyflie

The software is not able to damage the gyro but e.g. electrostatic discharge or mechanical stress are and if the MPU6050 broke it is very hard to tell why. What software did you flash? You can try flashing the old software again to rule that out. Also as I said I can make a custom version that print...
by tobias
Tue Jun 04, 2013 6:41 am
Forum: Support
Topic: [RE-OPEN] Broken firmware problem
Replies: 18
Views: 12301

Re: [RE-OPEN] Broken firmware problem

Keep us updated. What JTAG programmer did you get and does it come with a ARM JTAG 10-pin connector?
by tobias
Tue Jun 04, 2013 6:38 am
Forum: Support
Topic: Led's not as described in Wiki
Replies: 8
Views: 5892

Re: Led's not as described in Wiki

The green led goes into charge indication mode when the USB is connected. Can you plug in the battery and then connect the USB and see if the green led starts blinking to indicate that it is beeing charged?
by tobias
Tue Jun 04, 2013 6:18 am
Forum: Support
Topic: [SOLVED] Problem with the Crazyflie
Replies: 36
Views: 22617

Re: Problem with the Crazyflie

You are definitely unlucky as it looks like the gyro x-axis is broken. I think it is the first time we have a broken gyro as it before only have been the accelerometer. I think it will be very hard fixing the gyro with the "tap/bang" method. I can make a firmware which prints out all the s...