Search found 23 matches
- Tue Apr 22, 2014 3:16 pm
- Forum: General discussions
- Topic: How important are these parts & Geeetech crazyflie?
- Replies: 4
- Views: 3734
Re: How important are these parts & Geeetech crazyflie?
Thankyou Dershu, I will tell him to look into getting replacement parts before the next flight.Also, are you confirming that Geeetech is not genuine? I can not say that Geeetech is not a genuine accurate copy of the Crazyflie, but I recall one of the original developers on here recently commenting ...
- Tue Apr 22, 2014 6:15 am
- Forum: General discussions
- Topic: How important are these parts & Geeetech crazyflie?
- Replies: 4
- Views: 3734
Re: How important are these parts & Geeetech crazyflie?
I just helped a friend fix his crazyflie, the motor soldering was very bad (not that its easy at all) and during the process he accidentally de soldered the little black smb things between each motors through holes.. see pic. Also I noticed his crazyflie is made by Geeetech, is this a genuine crazy...
- Fri Apr 04, 2014 11:23 am
- Forum: Developer Discussions
- Topic: Motor Control
- Replies: 4
- Views: 3498
Re: Motor Control
Hello, I recently acquired a crazyflie 10DOF and will receive all the parts etc in about a month. Today I was skimming through some dev topics and found that many of you were saying that the most low level access to motor control goes through pitch roll yaw. Is this correct? Am I not able to indivi...
- Wed Apr 02, 2014 6:12 am
- Forum: General discussions
- Topic: Can't Lift Off
- Replies: 5
- Views: 3684
Re: Can't Lift Off
Hi, I'm pretty sure I put on both right but here is a picture of the props and the motor connections http://imgur.com/a/3kG11#jpLMlmW I've checked the assembly instructions but I will do so again. Let me know your thoughts. Thanks. IMHO, your propellers appear to mounted to rotate backwards, when c...
- Tue Mar 18, 2014 3:14 pm
- Forum: Support
- Topic: [SOLVED] Hang-up while booting the Bitcraze VM 0.5
- Replies: 8
- Views: 5160
Re: Hang-up while booting the Bitcraze VM 0.5
Isn't anyone in here who has some experience in troubleshooting Linux installations? :) According to your sig your running VMware Player on Windows 7 x64 ? 10 DOF Crazyflie, wireless PS3 controller, Bitcraze VM on VMware Player/Windows 7 x64 I am also running Windows 7 x64, but I am running the Bit...
- Tue Feb 25, 2014 4:36 pm
- Forum: Developer Discussions
- Topic: Powering through JTAG
- Replies: 2
- Views: 2199
Re: Powering through JTAG
Anybody know if it's safe to power the Crazyflie through the JTAG? The normal function of the power pin on an ARM JTAG pinout is to sense the power supply of the device under test so that the the JTAG interface buffers run at the DUT power voltage. It could possibly do what you want on some target ...
- Tue Feb 25, 2014 11:51 am
- Forum: Developer Discussions
- Topic: Multiple I2C Peripherals with same Addresses?
- Replies: 5
- Views: 3654
Re: Multiple I2C Peripherals with same Addresses?
You would need extra hardware to enable only one sensor on the bus at one time, to prevent bus contention.SpilledMyCatNip wrote: lets assume that I want to use 4 of the same senors, all with the same address. How do I work around this without having the same addresses interfere with each other?
-Peter
- Wed Feb 05, 2014 3:56 pm
- Forum: Support
- Topic: Xbox 360 does not show target values
- Replies: 2
- Views: 2223
Re: Xbox 360 does not show target values
Hi, I have downloaded all the required software but I can't seem to control my crzayflie using Xbox 360. I did saved the configure device mapping with Xbox 360 but, when I move the joysticks, the target values in the flight data does not show any response. This may sound terribly obvious, but somet...
- Mon Feb 03, 2014 6:25 am
- Forum: Support
- Topic: Max thrust - won't lift off
- Replies: 2
- Views: 3121
Re: Max thrust - won't lift off
It's a little surprising because the propellers seem to be spinning fast, so it doesn't even seem like low power. I get a loud buzz, but no movement off the ground. Am I missing something :?: Could you have accidently got the propeller rotation directions reversed???? With the correct propeller ins...
- Sat Jan 11, 2014 3:30 pm
- Forum: Support
- Topic: Crazyflie spins uncontrollably
- Replies: 17
- Views: 22262
Re: Crazyflie spins uncontrollably
torqu3e wrote: Which side is front on the CF?
Crazyflie Wiki http://wiki.bitcraze.se/projects:crazyf ... uide:index
Just below mid page.