Bitcraze Forums

Thanks Chad! Wait till you see the frame and motor mounts before judging whether they are worth the cost ;) To be honest I also think shapeways prints are a bit expensive, and I've tried to keep my margin to a minimum to make the price as competitive as possible. hopefully the printing cost will go ...

thanks! let me know what you think of the prop guard and the mounts if you do get them!

I finished my 3d printed prop guard and custom motor mount for the Crazyflie 2.0 The prop guard is based on the old one I made for Crazyflie 1.0, but the motor mounts are new to Crazyflie 2.0, because the motors are now plugged in rather than soldered. The mounts has integrated springs feet for cush...

Hi, I have the same problem. on Windows 10 x64, with cfclient 2016.4.1 and a wired xbox360 controller. an older version (2013) client was able to detect the controller and let me configure the input mappings (but not save these settings), so I know at least Windows 10 is seeing the controller correc...

the power switch location in the revA model is slight off..
fixed in revB
sketchup and dxf in the attached zip file

this should be the final version, no more further revisions (famous last words...)

eric

No worries Marcus!

btw I found pdfs of the electronics layout for the board, so I've updated those parts of the model as well.
this revA model replaces the one I posted previously - sketchup and dxf file in the zip file attached.

Eric

Thought I'd share again :) Here's a sketchup model of the crazyflie 2.0 I've been working up for a 3D printed frame design of mine. The board shape is accurate (based on the board online in the repository), the electronic bits on the board are based on my rough measurements, and only those bits that...

Thanks

while working on my crazyflie frame today, I noticed the centre point I used for rotation in my previous model was slightly off.
fixed it, so here is the revised version of the model, in sketchup and dxf format.

Eric

thanks!
please do add it to the repository! I hadn't realise there's a mechanical section in the repository
I can export a dxf, but it'll have to be sometime next week, currently out and about...
(or someone else with sketchup pro might be able to help)

E

had my crazyflie quadcopter for a few weeks now, pretty impressed by how stable it flies given it's size! I wanted to look at designing my own crazyflie frame for 3dprinting after reading about Vger's experiments in another thread: http://forum.bitcraze.se/viewtopic.php?f=11&t=298&hilit=fram...