Search found 10 matches

by er1c
Sat Jun 11, 2016 11:42 am
Forum: General discussions
Topic: 3dprinted prop guard and motor mounts
Replies: 8
Views: 3720

Re: 3dprinted prop guard and motor mounts

Thanks Chad! Wait till you see the frame and motor mounts before judging whether they are worth the cost ;) To be honest I also think shapeways prints are a bit expensive, and I've tried to keep my margin to a minimum to make the price as competitive as possible. hopefully the printing cost will go ...
by er1c
Wed Jun 08, 2016 1:43 am
Forum: General discussions
Topic: 3dprinted prop guard and motor mounts
Replies: 8
Views: 3720

Re: 3dprinted prop guard and motor mounts

thanks! let me know what you think of the prop guard and the mounts if you do get them!
by er1c
Fri Jun 03, 2016 6:40 am
Forum: General discussions
Topic: 3dprinted prop guard and motor mounts
Replies: 8
Views: 3720

3dprinted prop guard and motor mounts

I finished my 3d printed prop guard and custom motor mount for the Crazyflie 2.0 The prop guard is based on the old one I made for Crazyflie 1.0, but the motor mounts are new to Crazyflie 2.0, because the motors are now plugged in rather than soldered. The mounts has integrated springs feet for cush...
by er1c
Mon May 30, 2016 3:38 pm
Forum: Support
Topic: Win10 x64 - Crazyflie client doesn't recognize any gamepads
Replies: 1
Views: 1273

Re: Win10 x64 - Crazyflie client doesn't recognize any gamepads

Hi, I have the same problem. on Windows 10 x64, with cfclient 2016.4.1 and a wired xbox360 controller. an older version (2013) client was able to detect the controller and let me configure the input mappings (but not save these settings), so I know at least Windows 10 is seeing the controller correc...
by er1c
Sun May 22, 2016 3:34 am
Forum: Bitcraze
Topic: Crazyflie 2.0 Model/STL files
Replies: 17
Views: 9079

Re: Crazyflie 2.0 Model/STL files

the power switch location in the revA model is slight off..
fixed in revB
sketchup and dxf in the attached zip file

this should be the final version, no more further revisions (famous last words...)

eric
by er1c
Mon May 16, 2016 7:38 am
Forum: Bitcraze
Topic: Crazyflie 2.0 Model/STL files
Replies: 17
Views: 9079

Re: Crazyflie 2.0 Model/STL files

No worries Marcus!

btw I found pdfs of the electronics layout for the board, so I've updated those parts of the model as well.
this revA model replaces the one I posted previously - sketchup and dxf file in the zip file attached.

Eric
by er1c
Thu May 05, 2016 9:27 am
Forum: Bitcraze
Topic: Crazyflie 2.0 Model/STL files
Replies: 17
Views: 9079

Re: Crazyflie 2.0 Model/STL files

Thought I'd share again :) Here's a sketchup model of the crazyflie 2.0 I've been working up for a 3D printed frame design of mine. The board shape is accurate (based on the board online in the repository), the electronic bits on the board are based on my rough measurements, and only those bits that...
by er1c
Sun Jul 21, 2013 5:42 pm
Forum: General discussions
Topic: sketchup model
Replies: 13
Views: 6741

Re: sketchup model

Thanks :)

while working on my crazyflie frame today, I noticed the centre point I used for rotation in my previous model was slightly off.
fixed it, so here is the revised version of the model, in sketchup and dxf format.

Eric
by er1c
Mon Jul 15, 2013 3:07 pm
Forum: General discussions
Topic: sketchup model
Replies: 13
Views: 6741

Re: sketchup model

thanks!
please do add it to the repository! I hadn't realise there's a mechanical section in the repository :)
I can export a dxf, but it'll have to be sometime next week, currently out and about...
(or someone else with sketchup pro might be able to help)

E
by er1c
Sat Jul 13, 2013 7:31 am
Forum: General discussions
Topic: sketchup model
Replies: 13
Views: 6741

sketchup model

had my crazyflie quadcopter for a few weeks now, pretty impressed by how stable it flies given it's size! I wanted to look at designing my own crazyflie frame for 3dprinting after reading about Vger's experiments in another thread: http://forum.bitcraze.se/viewtopic.php?f=11&t=298&hilit=frame couldn...