Search found 9 matches
- Mon Apr 18, 2022 4:06 pm
- Forum: Bitcraze
- Topic: Position Hold with Flowdeck and CPPM input
- Replies: 2
- Views: 9792
Re: Position Hold with Flowdeck and CPPM input
thank you so much that worked perfectly. :D only one change need to be done extrxSetpoint.velocity.x = cppmConvert2Float(ch[EXTRX_CH_ROLL], -1, 1, EXTRX_DEADBAND_ZVEL); extrxSetpoint.velocity.y = cppmConvert2Float(ch[EXTRX_CH_PITCH], -1, 1, EXTRX_DEADBAND_ZVEL); needs to be changed to extrxSetpoint....
- Tue Apr 12, 2022 10:18 am
- Forum: Bitcraze
- Topic: Position Hold with Flowdeck and CPPM input
- Replies: 2
- Views: 9792
Position Hold with Flowdeck and CPPM input
Dear Bitcraze, we would like to use CPPM Receiver with Position Hold for our Application, therefore we are using the Flowdeck for that. While flying with Crazy Radio the Position Hold works flawlessly, I can't figure out how to use Position Hold with CPPM Input though. What can I do to configure Cha...
- Tue Mar 29, 2022 4:27 pm
- Forum: Bitcraze
- Topic: adding CPPM receiver to Bolt FC with mounted flow deck
- Replies: 6
- Views: 13616
Re: adding CPPM receiver to Bolt FC with mounted flow deck
thank you so much that helped a lot and finally I could get it working. I need cppm with flow deck and assist mode hover. while using cfclient and takeoff the optical flow works. After enabling the the transmitter assist mode is disabled and the drone isn't locked in place anymore. Is it possible to...
- Fri Mar 25, 2022 12:50 pm
- Forum: Bitcraze
- Topic: Crazyradio PA PPM Input
- Replies: 3
- Views: 11023
Re: Crazyradio PA PPM Input
Thanks for your reply. I want to connect ppm to Crazyradio PA to avoid using bigquad deck. I have a bolt fc with flow deck. The cppm input pin collides with cs pin of flow deck.
Have you any instructions how to use the Crazyradio PA with PPM input?
Thanks a lot in advance
Have you any instructions how to use the Crazyradio PA with PPM input?
Thanks a lot in advance
- Fri Mar 25, 2022 12:39 pm
- Forum: Bitcraze
- Topic: adding CPPM receiver to Bolt FC with mounted flow deck
- Replies: 6
- Views: 13616
Re: adding CPPM receiver to Bolt FC with mounted flow deck
thank you. I've tried to change the pin to PB8 (IO_1 left Crazyflie connector Pin 6) by changing the cppm.c line 78 and below to #else // default is PB8 #define CPPM_TIMER_NUMBER 10 #define CPPM_TIMER_CHANNEL 1 #define CPPM_GPIO_RCC RCC_AHB1Periph_GPIOB #define CPPM_GPIO_PORT GPIOB #define CPPM_GPIO...
- Thu Mar 17, 2022 7:39 am
- Forum: Bitcraze
- Topic: adding CPPM receiver to Bolt FC with mounted flow deck
- Replies: 6
- Views: 13616
Re: adding CPPM receiver to Bolt FC with mounted flow deck
figured out that the bigquad deck wich supplies cppm uses pin 5 on right connector to read signal from receiver.
the flow deck uses pin 5 MOSI for communication to PMW3901MB. is there a possible way to remap the cppm pin?
the flow deck uses pin 5 MOSI for communication to PMW3901MB. is there a possible way to remap the cppm pin?
- Thu Mar 17, 2022 7:17 am
- Forum: Support
- Topic: use Crazyflie Bold with Flow and CPPM Receiver
- Replies: 1
- Views: 9045
use Crazyflie Bold with Flow and CPPM Receiver
Hey i need to use Crazyflie with brushless motors and flow deck.
how is it possible to connect external cppm receiver?
any solution will be a solution.
Thank you in advance.
how is it possible to connect external cppm receiver?
any solution will be a solution.
Thank you in advance.
- Wed Mar 16, 2022 2:50 pm
- Forum: Bitcraze
- Topic: adding CPPM receiver to Bolt FC with mounted flow deck
- Replies: 6
- Views: 13616
adding CPPM receiver to Bolt FC with mounted flow deck
Dear community could you please tell me if there is any option to use an CPPM Receiver with Bolt FC and mounted Flow deck? a working solutions for me could be to use the pin 5 of the right deck connector wich is used by the big quad deck. (marked in red) Bildschirmfoto 2022-03-16 um 15.49.11.png I c...
- Wed Mar 16, 2022 2:44 pm
- Forum: Bitcraze
- Topic: Crazyradio PA PPM Input
- Replies: 3
- Views: 11023
Crazyradio PA PPM Input
I need help connecting my Taranis to Crazyflie Bolt deck.
I figured out that the Crazyradio PA got an PPM Input what is described in this article:
https://www.bitcraze.io/2012/04/control ... rc-remote/
could you please tell me how to hook it up?
thank you in advance
4things
I figured out that the Crazyradio PA got an PPM Input what is described in this article:
https://www.bitcraze.io/2012/04/control ... rc-remote/
could you please tell me how to hook it up?
thank you in advance
4things