Hello Kimberly,
thank you first of all for helping me. The stateEstimate works fine actually by holding the Crazyflie in my Handy without flying and i also faced the crazyflie in the right direction...
Do you know what else it could be ?
Yours Rubics.
Search found 8 matches
- Mon Apr 11, 2022 10:16 am
- Forum: Bitcraze
- Topic: Position Failure
- Replies: 3
- Views: 9917
- Thu Apr 07, 2022 1:30 pm
- Forum: Bitcraze
- Topic: Position Failure
- Replies: 3
- Views: 9917
Position Failure
Hello Everyone, My Crazyflie does not fly in the positions I have specified and wanted to ask if someone can help me. First i would like to show you my Setup. Set-UP.PNG The position of the Crazyflie can be read at the top left corner. The first thing i did was, i just wanted the Crazyflie to fly ju...
- Thu Feb 24, 2022 12:53 pm
- Forum: Bitcraze
- Topic: Crazyfly flight problems
- Replies: 1
- Views: 8739
Crazyfly flight problems
Hello Everybody, my Crazyfly CrazyflyDraufsicht.jpg is not able to fly correctly and i dont know why.... I'm using following Codes: https://pastebin.com/MgwHyXph . My Deck is going to be detected. The result of flying, however, does not meet my expectations. Because the Crazyflie takes off and then ...
- Fri Feb 18, 2022 11:13 am
- Forum: Bitcraze
- Topic: Deck connection Python_script
- Replies: 8
- Views: 15205
Re: Deck connection Python_script
Hello jonasdn,
i dont know what you did , but now my deck is going to be detected. Thank you soooooo much
The Output is:
1
Deck is attached!
yours,
RubIcs
i dont know what you did , but now my deck is going to be detected. Thank you soooooo much
The Output is:
1
Deck is attached!
yours,
RubIcs
- Tue Feb 15, 2022 10:45 am
- Forum: Bitcraze
- Topic: Deck connection Python_script
- Replies: 8
- Views: 15205
Re: Deck connection Python_script
Hello Jonasdn,
i hope i did everything right. If so my code can be found here here: https://pastebin.com/SegtpYjL.
Thank you very much.
i hope i did everything right. If so my code can be found here here: https://pastebin.com/SegtpYjL.
Thank you very much.
- Thu Feb 10, 2022 1:01 pm
- Forum: Bitcraze
- Topic: Deck connection Python_script
- Replies: 8
- Views: 15205
Re: Deck connection Python_script
Yeah for sure! Thanks for you patience.
The output is "Deck is NOT attached!"
Thank you very much.
RubICS
The output is "Deck is NOT attached!"
Thank you very much.
RubICS
- Tue Feb 08, 2022 11:44 am
- Forum: Bitcraze
- Topic: Deck connection Python_script
- Replies: 8
- Views: 15205
Re: Deck connection Python_script
First of all thank you very much jonasdn for replying. The output when i run the script is: "no deck is detected" as it is written in the function. And the Output of the basicparam.py example is this: Part1.PNG Part2.PNG part3.PNG Bild4.PNG pART4.PNG As I can see, my deck (bcDWM1000) is al...
- Thu Feb 03, 2022 1:29 pm
- Forum: Bitcraze
- Topic: Deck connection Python_script
- Replies: 8
- Views: 15205
Deck connection Python_script
Hello Everyone, I must admit that I am still quite a beginner. I was doing the Step_By_Step-Guide, given here: https://www.bitcraze.io/documentation/repository/crazyflie-lib-python/master/user-guides/sbs_motion_commander/, and a problem has occurred. I don't understand why my deck, which I use, is n...