Bitcraze Forums

Thank you for your response.

If you don't mind, could you please tell me how to wire using PDB?

After that, I tried the way to power the ECS directly from the battery and use only the signal wire in the middle, but it didn't work, the motor spun a little and stopped.

Hello. I am making my own drone using Crazyflie Bolt. After turning on the power, I checked the propeller to the point where it spins, but after spinning it for a while, its parts break with a buzzer (it also emitted smoke). If you are familiar with this problem, please advise me the cause and count...

Hello. I am facing a problem when I am using CrazyradioPA to communicate with Crazyflie that sometimes the communication does not work and it drops. There are many wifi generating devices around and I cannot turn them off. Is there any way to prevent radio interference and improve the communication ...

Hi arnaud Thank you for explaining why it doesn't work and how Crazyflie works. I now understand that there are different ways to write Firmware. As you said, the Crazyflie did not broken, and I was able to boot it successfully by using cold bootload via wireless (using cfclient). Thank you for help...

Hi, I'm in trouble with Crazyflie. I hope you can tell me how to solve this problem. --- Environment OS=Ubuntu 20.04 (BitcrazeVM) ROS=Noetic Python=3.8.10 Drone=Crazyflie2.1 radio=CrazyradioPA --- Incident： This issue may be related to the topic in #p22998. The Crazyflie took flight and received a s...

Hi I apologize for not replying for a long time. I did not understand how the bootloader works. When I tried it again with a clear understanding, I was able to successfully flash it. It was needed to pass the USB information to the VM. (I did change the Shebang from python to python3). Thank you ver...

[My Environment] OS: BitcrazeVM (Ubuntu 20.04) Radio: Crazyradio PA --- I am setting up Crazyswarm. I'm trying to update the firmware of CrazyradioPA by referring to the following site, but I get an error and cannot proceed. https://www.bitcraze.io/documentation/repository/crazyradio-firmware/master...