Search found 6 matches
- Tue Jun 29, 2021 1:38 pm
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 4165
Re: Client cannot connect to the Crazyflie
Hello Kimberly. Sorry for the huge delay. I had too many exams last week so I couldn't answer. Yes, LEDs are normal, no I can't connect the drone with a USB. Same thing happening when I try to connect it, its just waits forever. But, I notice something. In the console tab of the client, there is a f...
- Fri Jun 18, 2021 5:40 pm
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 4165
Re: Client cannot connect to the Crazyflie
First of all, thank you for helping me in such a kind way. I tried many times but the problem still persists. Maybe I didn't explain myself fully. Following the instructions you mentioned, I came to the cold boot (recovery) tab with the drone turned off. I turn on the Crazyflie in bootloader mod and...
- Fri Jun 18, 2021 8:56 am
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 4165
Re: Client cannot connect to the Crazyflie
Yes, it worked for that part! I am now able to initiate bootloader cold boot and program the Crazyflie but then 'Restart in firmware mode' option is unclickable. So, I restart the drone in bootloader mode one more time and then click initiate bootloader cold boot. Now Restart in firmware mode is cli...
- Fri Jun 18, 2021 6:03 am
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 4165
Re: Client cannot connect to the Crazyflie
Additionally, I remembered that when I try to use that basic code on the document and had the problem of not being able to fly, I tried to change the code a little bit. I just add velocity values to some commands and delete the other ones (such as circling). I then tried to run the unchanged one. No...
- Fri Jun 18, 2021 5:56 am
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 4165
Re: Client cannot connect to the Crazyflie
Thank you for your kind answer. Flowdeck was attached, so after your answer, I try the same thing without it but nothing changed. I plug the USB cable and open the client but again, cannot connect. Finally, I followed the instructions and tried to reflash the Crazyflie but I have got an error on the...
- Wed Jun 16, 2021 2:27 pm
- Forum: Support
- Topic: Client cannot connect to the Crazyflie
- Replies: 10
- Views: 4165
Client cannot connect to the Crazyflie
Hi. My Cfclient can detect the drone but can't connect with it. I got a Crazyflie 2.1 a few days ago. I follow the official documentation and a paper (Flying Multiple UAVs Using ROS by Hönig and Ayanian). I had no problem connecting to the drone at first and tried to fly it with the basic code at th...