Bitcraze Forums

Okay so I have the firmware flashed and the blue and yellow leds are on for the deck. Can I ask how to set up the base stations? I have two of the v1.0 and I haven’t been able to find a reliable guide

Okay so now I can flash the firmware, but for some reason the deck isn’t updating. The blue progress bar finishes and the crazyflie restarts twice, but when I reset it the deck still has the blue and red lights on. Also in the console it says that there are 0 decks detected despite the fact that I h...

Yes I’m trying to do that, but every time I attempt to flash the firmware exactly as shown in the video it says “flashing” for a second before disconnecting from the drone but still allowing me to see the attitude indicator. The full error is available above, I’m not sure what I’ve done wrong but fl...

SYS: Production release 2021.03 SYS: I am 0x203037435753501700340056 and I have 1024KB of flash! CFGBLK: v1, verification [OK] DECK_CORE: 1 deck(s) found DECK_CORE: Calling INIT on driver bcLighthouse4 for deck 0 IMU: BMI088: Using I2C interface. IMU: BMI088 Gyro connection [OK]. IMU: BMI088 Accel c...

Here’s what I get when I do that first command: Name: cfclient Version: 2021.4.post13+f25f72d Summary: Bitcraze Cazyflie quadcopter client Home-page: http://www.bitcraze.io Author: Bitcraze team Author-email: contact@bitcraze.se License: UNKNOWN Location: /home/jaden/crazyflie-clients-python/src Req...

Hey Jonas, thanks for responding. I’m using a lighthouse deck. When I try to flash the latest version of the firmware with cfclient(installed through python) what happens is that it says “connected in firmware mode” on the boot loader dialog. Then when I try to upload, it simply says “flashing” for ...

There's a pretty big issue that I'm having and I'm wondering if you could help me through it. I've set up the crazyflie exactly the way it dictated in the instructions, now I'm trying to flash the firmware using cfclient. But whenever I do so I get the error message: WARNING:vispy:QObject::connect: ...