Search found 8 matches
- Wed Jun 30, 2021 9:09 am
- Forum: Developer Discussions
- Topic: Broadcasting P2P packets
- Replies: 2
- Views: 1177
Re: Broadcasting P2P packets
Thank you for this info! In my case I wanted to receive a signal from CF by two CRs in situation where CRs are blind so the CF acts as router/repeater. In the end I only decided to use CR->CF->CR instead of CR<-CF->CR or CR<->CF<->CR since the code was already there. My final goal is to create a mes...
- Wed Jun 02, 2021 9:11 am
- Forum: Developer Discussions
- Topic: Broadcasting P2P packets
- Replies: 2
- Views: 1177
Broadcasting P2P packets
Hello! I'm working on a scenario where one Crazyflie broadcasts P2P packets and two Crazyradios tune in. Something like the examples/app_peer_to_peer, but instead of CF<->CF, like this CR<-CF->CR. I thought maybe flashing the P2P app on the Crazyflie and then running crazyradio-firmware/examples/prx...
- Thu May 13, 2021 11:08 am
- Forum: Bitcraze
- Topic: crazyflie 2 won't take off properly commander.send_position_setpoint
- Replies: 9
- Views: 5909
Re: crazyflie 2 won't take off properly commander.send_position_setpoint
shouldn't the height displayed in the flight data be read from the altimeter? The barometer is not used by default. It can be enable it with a compile flag though. As long as the configured anchor position is within +-5 cm of their real positions, it should be OK. There are log variables for the di...
- Wed May 12, 2021 8:04 am
- Forum: Developer Discussions
- Topic: J-Link as debugger
- Replies: 3
- Views: 1768
Re: J-Link as debugger
Thanks for the links! actually the "JLink software" does not officially support STM32F405RG, however, I followed the guide on setting up Eclipse here: https://www.bitcraze.io/documentation/repository/crazyflie-firmware/master/development/openocd_gdb_debugging/ and I used the command openoc...
- Tue May 11, 2021 5:18 pm
- Forum: Developer Discussions
- Topic: J-Link as debugger
- Replies: 3
- Views: 1768
J-Link as debugger
Hello, I've been trying to make a JTAG debugger work with Crazyflie 2.1, so far without success. The device is called "Atmel SAM-ICE", its interface is SEGGER J-Link, I followed instructions on this page: https://wiki.bitcraze.io/doc:crazyflie:dev:starting I was able to flash the firmware,...
- Tue Apr 27, 2021 6:59 am
- Forum: General discussions
- Topic: Hold altitude regardless of sensor readings?
- Replies: 1
- Views: 953
Hold altitude regardless of sensor readings?
Hello, I need to fly the drone through the window in an apartment, obviously there's a big change in altitude (with respect to floor) but I don't want Crazyflie to adjust its new altitude (would crash if it does), rather "hold" its z. Is this possible using the Python API? Thanks PS i'm ta...
- Thu Mar 11, 2021 1:14 pm
- Forum: General discussions
- Topic: Pair multiple Crazyflies using BLE?
- Replies: 2
- Views: 1330
Re: Pair multiple Crazyflies using BLE?
Thank you for your detailed answer
- Tue Mar 09, 2021 9:46 am
- Forum: General discussions
- Topic: Pair multiple Crazyflies using BLE?
- Replies: 2
- Views: 1330
Pair multiple Crazyflies using BLE?
Hey!
Is it possible to pair two Crazyflie drones using BLE?
Consider a scenario where you want the drones control each other far way from the host.
Is it possible to pair two Crazyflie drones using BLE?
Consider a scenario where you want the drones control each other far way from the host.