Search found 40 matches
- Mon Sep 27, 2021 8:32 am
- Forum: Developer Discussions
- Topic: Reference point state->z
- Replies: 3
- Views: 1145
Re: Reference point state->z
Okay, so the state is in body frame of reference?
- Thu Sep 23, 2021 3:06 pm
- Forum: Developer Discussions
- Topic: Reference point state->z
- Replies: 3
- Views: 1145
Reference point state->z
Hi, I have a quick question about the height state z. I have a crazyflie with flowdeck. When i read out state->z I get the height of the crazyflie. My question is from where is this height measured? Is it from the ground upto the flowdeck, or upto the main board or maybe even the battery? Can someon...
- Mon Sep 13, 2021 1:47 pm
- Forum: Support
- Topic: Crazyradio not working
- Replies: 6
- Views: 14012
Re: Crazyradio not working
Thanks, maybe an improvement for the future. Create a small case around the usb connection such that it will be less prone to bending. Cause when plugged in it is quiet vulnerable to bending due to some cable of person touching it.
like: https://www.thingiverse.com/thing:84295
like: https://www.thingiverse.com/thing:84295
- Sun Sep 12, 2021 9:39 am
- Forum: Support
- Topic: Crazyradio not working
- Replies: 6
- Views: 14012
Re: Crazyradio not working
What do you mean? Which note?
- Fri Sep 10, 2021 8:50 am
- Forum: Support
- Topic: Crazyradio not working
- Replies: 6
- Views: 14012
Re: Crazyradio not working
Dear all, I just plugged in my crazyradio and the green and red led are on, and the cfclient is not abe to find the dongle. Same for trying to flash it no dongle is found. The crazyradio has always worked for me and the connections still seem intact, even though the donge is bend due to being so fra...
- Fri Aug 27, 2021 8:59 am
- Forum: Developer Discussions
- Topic: Wrong Height using flowdeck
- Replies: 21
- Views: 5497
Re: Wrong Height using flowdeck
You mean another crazyflie?
- Thu Aug 26, 2021 11:52 am
- Forum: Developer Discussions
- Topic: Wrong Height using flowdeck
- Replies: 21
- Views: 5497
Re: Wrong Height using flowdeck
I updated both cflib and the cfclient but still the take-off button does not function. When I run the latest firmware on the cf the problem still exists. I tested it with multiranger attached and problem happens and disappears if you touch the metal pins to discharge. I tested it witouth the multira...
- Thu Aug 26, 2021 9:33 am
- Forum: Developer Discussions
- Topic: Wrong Height using flowdeck
- Replies: 21
- Views: 5497
Re: Wrong Height using flowdeck
The Take-off button in the client does nothing, so I do not know what is wrong.
- Thu Aug 26, 2021 9:27 am
- Forum: Developer Discussions
- Topic: Wrong Height using flowdeck
- Replies: 21
- Views: 5497
Re: Wrong Height using flowdeck
I will test it. I tested another flowdeck v2 and had similar problem. I did not even fly that time. So what I did was just take the drone and look at logging in cfclient. Just switching it on and off showed a different heigth. Again when touching the pins or unplugging the battery when having the dr...
- Mon Aug 23, 2021 9:37 am
- Forum: Developer Discussions
- Topic: Wrong Height using flowdeck
- Replies: 21
- Views: 5497
Re: Wrong Height using flowdeck
Dear tobias, I found the problem. It seems to be something to do with the charge left in the crazyflie after turning it off without unplugging the battery. By replugging the battery between flights the problem is one. Moreover when touching the connection pins to the multiranger, with either my fing...