Search found 40 matches

by Max_Kemmeren
Mon Sep 27, 2021 8:32 am
Forum: Developer Discussions
Topic: Reference point state->z
Replies: 3
Views: 945

Re: Reference point state->z

Okay, so the state is in body frame of reference?
by Max_Kemmeren
Thu Sep 23, 2021 3:06 pm
Forum: Developer Discussions
Topic: Reference point state->z
Replies: 3
Views: 945

Reference point state->z

Hi, I have a quick question about the height state z. I have a crazyflie with flowdeck. When i read out state->z I get the height of the crazyflie. My question is from where is this height measured? Is it from the ground upto the flowdeck, or upto the main board or maybe even the battery? Can someon...
by Max_Kemmeren
Mon Sep 13, 2021 1:47 pm
Forum: Support
Topic: Crazyradio not working
Replies: 6
Views: 12683

Re: Crazyradio not working

Thanks, maybe an improvement for the future. Create a small case around the usb connection such that it will be less prone to bending. Cause when plugged in it is quiet vulnerable to bending due to some cable of person touching it.

like: https://www.thingiverse.com/thing:84295
by Max_Kemmeren
Sun Sep 12, 2021 9:39 am
Forum: Support
Topic: Crazyradio not working
Replies: 6
Views: 12683

Re: Crazyradio not working

What do you mean? Which note?
by Max_Kemmeren
Fri Sep 10, 2021 8:50 am
Forum: Support
Topic: Crazyradio not working
Replies: 6
Views: 12683

Re: Crazyradio not working

Dear all, I just plugged in my crazyradio and the green and red led are on, and the cfclient is not abe to find the dongle. Same for trying to flash it no dongle is found. The crazyradio has always worked for me and the connections still seem intact, even though the donge is bend due to being so fra...
by Max_Kemmeren
Fri Aug 27, 2021 8:59 am
Forum: Developer Discussions
Topic: Wrong Height using flowdeck
Replies: 21
Views: 5113

Re: Wrong Height using flowdeck

You mean another crazyflie?
by Max_Kemmeren
Thu Aug 26, 2021 11:52 am
Forum: Developer Discussions
Topic: Wrong Height using flowdeck
Replies: 21
Views: 5113

Re: Wrong Height using flowdeck

I updated both cflib and the cfclient but still the take-off button does not function. When I run the latest firmware on the cf the problem still exists. I tested it with multiranger attached and problem happens and disappears if you touch the metal pins to discharge. I tested it witouth the multira...
by Max_Kemmeren
Thu Aug 26, 2021 9:33 am
Forum: Developer Discussions
Topic: Wrong Height using flowdeck
Replies: 21
Views: 5113

Re: Wrong Height using flowdeck

The Take-off button in the client does nothing, so I do not know what is wrong.
by Max_Kemmeren
Thu Aug 26, 2021 9:27 am
Forum: Developer Discussions
Topic: Wrong Height using flowdeck
Replies: 21
Views: 5113

Re: Wrong Height using flowdeck

I will test it. I tested another flowdeck v2 and had similar problem. I did not even fly that time. So what I did was just take the drone and look at logging in cfclient. Just switching it on and off showed a different heigth. Again when touching the pins or unplugging the battery when having the dr...
by Max_Kemmeren
Mon Aug 23, 2021 9:37 am
Forum: Developer Discussions
Topic: Wrong Height using flowdeck
Replies: 21
Views: 5113

Re: Wrong Height using flowdeck

Dear tobias, I found the problem. It seems to be something to do with the charge left in the crazyflie after turning it off without unplugging the battery. By replugging the battery between flights the problem is one. Moreover when touching the connection pins to the multiranger, with either my fing...