I've just installed the cflib from source. Now everything seems to work again.
Thanks again for pointing me towards this dependency!
Search found 30 matches
- Fri Feb 05, 2021 1:43 pm
- Forum: Support
- Topic: cfclient fails to start
- Replies: 3
- Views: 1781
- Fri Feb 05, 2021 1:32 pm
- Forum: Support
- Topic: cfclient fails to start
- Replies: 3
- Views: 1781
Re: cfclient fails to start
Hi,
o.k., thanks for the info and the suggestion. Would it also help to use the version available via snap?
o.k., thanks for the info and the suggestion. Would it also help to use the version available via snap?
- Fri Feb 05, 2021 10:10 am
- Forum: Support
- Topic: cfclient fails to start
- Replies: 3
- Views: 1781
cfclient fails to start
Hi, after recently updating/pulling the cfclient source the client gui fails to start under Linux Mint 20.1 I've tried reinstalling the client but that didn't help either. Here's the console output: python3 -m cfclient.gui INFO:__main__:Disabling STL printouts INFO:cfclient.utils.input.inputreaders:...
- Thu Nov 19, 2020 6:29 pm
- Forum: Lighthouse positioning system
- Topic: ESTKALMAN: State out of bounds, resetting
- Replies: 8
- Views: 3134
Re: ESTKALMAN: State out of bounds, resetting
O.K., thanks for confirming the observed effect and for pointing towards the app layer option. I might try that.
- Thu Nov 19, 2020 2:14 pm
- Forum: Lighthouse positioning system
- Topic: ESTKALMAN: State out of bounds, resetting
- Replies: 8
- Views: 3134
Re: ESTKALMAN: State out of bounds, resetting
Hi,
thanks for the reply. Please let me know if you need more info from my setup to assist your efforts.
Regards
thanks for the reply. Please let me know if you need more info from my setup to assist your efforts.
Regards
- Thu Nov 19, 2020 9:55 am
- Forum: Lighthouse positioning system
- Topic: ESTKALMAN: State out of bounds, resetting
- Replies: 8
- Views: 3134
Re: ESTKALMAN: State out of bounds, resetting
Hi, I have the same "position estimate divergence" problem. I'm using two V1 base stations and followed the LH setup instructions, including pasting the results of the get_bs_geometry.py script into the lighhouse_core.c source file, building and flashing. The CF seems to boot without error...
- Wed Nov 18, 2020 4:21 pm
- Forum: Support
- Topic: Thrust commands not accepted when using FrSky TX as controller
- Replies: 2
- Views: 1378
Re: Thrust commands not accepted when using FrSky TX as controller
Hi Arnaud, I've just tried setting the "min thrust" parameter in the cfclient to zero % and this indeed did the trick! I'd already adjusted the thrust axis setup in the FrSky TX SW to cover the full range between 0% and 100% so it was obviously just the lower limit in the cfclient. Thank y...
- Tue Nov 17, 2020 12:49 pm
- Forum: Support
- Topic: Thrust commands not accepted when using FrSky TX as controller
- Replies: 2
- Views: 1378
Thrust commands not accepted when using FrSky TX as controller
Hi, I'm currently trying to control the CF2.1 (via the cfclient, current version) with a FrSky RC transmitter and the corresponding FrSky USB Sim dongle. The TX/dongle is visible in the OS as a joystick. I'm able to "see" and configure this input device in the cfclient menu and I've create...
- Wed Oct 14, 2020 11:08 am
- Forum: Support
- Topic: cfclient start fails with segmentation fault under Linux
- Replies: 6
- Views: 3140
Re: cfclient start fails with segmentation fault under Linux
Hi,
I've just removed and then reinstalled the cfclient after today's bugfixes: now everything seems to work again and I didn't see any unexpected error messages in the terminal output.
Thanks for the quick support effort!
Regards
Tintin
I've just removed and then reinstalled the cfclient after today's bugfixes: now everything seems to work again and I didn't see any unexpected error messages in the terminal output.
Thanks for the quick support effort!
Regards
Tintin
- Tue Oct 13, 2020 1:57 pm
- Forum: Support
- Topic: cfclient start fails with segmentation fault under Linux
- Replies: 6
- Views: 3140
Re: cfclient start fails with segmentation fault under Linux
Hi,
in my desperation I also tried to install the cfclient via snap as per the published instructions. The installation worked but the client won't start. No error messages whatsoever.
Hope you come up with a fix soon, since I'm completely grounded.
Regards
Tintin
in my desperation I also tried to install the cfclient via snap as per the published instructions. The installation worked but the client won't start. No error messages whatsoever.
Hope you come up with a fix soon, since I'm completely grounded.
Regards
Tintin