Search found 13 matches
- Sun Sep 06, 2020 4:53 pm
- Forum: Developer Discussions
- Topic: Send Thrust, yaw pitch roll command
- Replies: 7
- Views: 2607
Re: Send Thrust, yaw pitch roll command
I believe this is what you are looking for. Here is the conversion between thrust values to acceleration m/s^2, https://github.com/bitcraze/crazyflie-firmware/blob/8c925aa7abd79ac05ef7d94b98bfacd4e37441fd/src/modules/src/estimator_kalman.c#L184 You can then divide by the mass in kilograms to get it ...
- Sun Sep 06, 2020 4:44 pm
- Forum: Developer Discussions
- Topic: Sending roll/pitch/yaw/thrust in High-Level Mode
- Replies: 1
- Views: 1135
Sending roll/pitch/yaw/thrust in High-Level Mode
I am interested in using the CF firmware logic for calculating setpoints and the roll/pitch/yaw/thrust computed by the controller to be passed back to the CF as send_setpoint(roll, pitch, yaw, thrust). Basically, the same roll/pitch/yaw/thrust computed by the firmware is sent back to the drone from ...
- Fri Sep 04, 2020 4:27 pm
- Forum: Developer Discussions
- Topic: [CLOSED] Logging setpoint (roll, pitch, yaw, thrust) using ROS and high-level commander mode
- Replies: 2
- Views: 1374
Re: [CLOSED] Logging setpoint (roll, pitch, yaw, thrust) using ROS and high-level commander mode
Thanks for the explanation. I am able to log the desired roll/pitch/yaw/thrust values now.
I am closing the topic.
I am closing the topic.
- Tue Sep 01, 2020 6:01 pm
- Forum: Developer Discussions
- Topic: [CLOSED] Logging setpoint (roll, pitch, yaw, thrust) using ROS and high-level commander mode
- Replies: 2
- Views: 1374
[CLOSED] Logging setpoint (roll, pitch, yaw, thrust) using ROS and high-level commander mode
I am interested in logging the setpoints that the underlying controller tracks. My current understanding is the following: For the various set point modes available (position, velocity, attitude), the commanderGetSetpoint(&setpoint, &state) computes the necessary setpoint needed to execute a...
- Tue Jun 16, 2020 5:39 pm
- Forum: Lighthouse positioning system
- Topic: [CLOSED] Lighthouse Estimation Inaccurate & Noisy
- Replies: 2
- Views: 1428
Re: Lighthouse Estimation Inaccurate & Noisy
It is working well now. I had the followed the wiki while using calibration data from the VIVE controller instead of using the calibration method computed on-board the drone. After using the drone to calibrate itself, I am getting very clean and accurate estimates.
I will close the topic.
I will close the topic.
- Mon Jun 08, 2020 10:56 pm
- Forum: Lighthouse positioning system
- Topic: [CLOSED] Lighthouse Estimation Inaccurate & Noisy
- Replies: 2
- Views: 1428
[CLOSED] Lighthouse Estimation Inaccurate & Noisy
I used LH V1 earlier in February 2020 using 2019 CF release. It worked very reliably. This week I moved to the 2020 release. I calibrated and flashed using the following wiki: https://www.bitcraze.io/documentation/repository/crazyflie-firmware/master/functional-areas/lighthouse_overview/ My state es...
- Tue Feb 18, 2020 4:14 pm
- Forum: External positioning systems
- Topic: [CLOSED] Lighthouse Position always at zero for CF
- Replies: 8
- Views: 7330
Re: [CLOSED] Lighthouse Position always at zero for CF
Thanks guys. It worked.
Simply had to set "CENTER_AROUND_CONTROLLER = True".
Here's the new kalman state positions.
I think the topic can be closed.
Simply had to set "CENTER_AROUND_CONTROLLER = True".
Here's the new kalman state positions.
I think the topic can be closed.
- Mon Feb 17, 2020 5:38 pm
- Forum: External positioning systems
- Topic: [CLOSED] Lighthouse Position always at zero for CF
- Replies: 8
- Views: 7330
Re: Lighthouse Position always at zero for CF
Yes, I read that. ... you can open the get_bs_position.py script and modify the top of it to set “CENTER_AROUND_CONTROLLER = True”. Be aware that this will put the SteamVR and your space out of sync, so none of the example using the SteamVR coordinate will work correctly. Reading that, I assumed cer...
- Mon Feb 17, 2020 4:08 am
- Forum: External positioning systems
- Topic: Data logging not working from python script
- Replies: 1
- Views: 3603
Data logging not working from python script
I am trying to read in position data of cf using the asynchronous logger script in python. I commented out line #151 and uncommented #150 of autonomousSequence.py script: https://github.com/bitcraze/crazyflie-lib-python/blob/master/examples/autonomousSequence.py#L151 I get the following output: pyth...
- Sun Feb 16, 2020 11:24 pm
- Forum: External positioning systems
- Topic: Lighthouse versus other state estimates: which one to log/pull?
- Replies: 1
- Views: 4073
Lighthouse versus other state estimates: which one to log/pull?
I am confused with so many logging variables giving position, velocity, and attitude estimates. There's lighthouse.x/y/z, kalman.stateX/Y/Z, stateEstimate.x/y/z. Similarly, for velocities and attitudes. Then there's also stabilizer.roll/pitch/yaw. Which ones should I work with if i want: Linear stat...