Search found 7 matches

by MadeInPierre
Mon Oct 28, 2019 4:33 pm
Forum: Developer Discussions
Topic: Crazyflie sometimes can't boot after flashing the firmware
Replies: 7
Views: 3631

Re: Crazyflie sometimes can't boot after flashing the firmware

Hi, Just to update this post, I just received the JTAG Adapter & STLink V2 Debugger and flashing through this works like a charm! I have not had a single flash error until now. I guess something is happening when flashing the CF with the radio, i hope the reason will be found out some day... if ...
by MadeInPierre
Mon Oct 28, 2019 1:05 pm
Forum: Developer discussions
Topic: Can I install the developer VM image natively?
Replies: 5
Views: 15518

Re: Can I install the developer VM image natively?

I followed the instructions in the wiki here , but unfortunately I get the following error when trying to start a debug session in Eclipse CDT: ... Hi, I just received a JTAG adapter from the bitcraze shop and STLink V2 debugger with hope to have step-by-step debugging. I also managed to flash the ...
by MadeInPierre
Wed Oct 23, 2019 9:06 am
Forum: Developer Discussions
Topic: Crazyflie sometimes can't boot after flashing the firmware
Replies: 7
Views: 3631

Re: Crazyflie sometimes can't boot after flashing the firmware

Hi, thank you for your help and quick reply! Yes the LEDs are an excellent design choice! I see, unfortunately I get this quite often now, maybe I'm around too many 2.4GHz devices. Do you know what the two red LEDs mean on the other hand? Is it a fail in the same way but just happens later in the co...
by MadeInPierre
Tue Oct 22, 2019 2:47 pm
Forum: Developer Discussions
Topic: Crazyflie sometimes can't boot after flashing the firmware
Replies: 7
Views: 3631

Re: Crazyflie sometimes can't boot after flashing the firmware

We have experienced some problems flashing when we flash demos, but usually the fail rate is more like 1 failed flashing every ~0 times. But I can confirm that there is a reliability problem in the bootloader that should be addressed. The first step would be to get working on this ticket: https://g...
by MadeInPierre
Tue Oct 22, 2019 2:15 pm
Forum: Developer Discussions
Topic: Crazyflie sometimes can't boot after flashing the firmware
Replies: 7
Views: 3631

Re: Crazyflie sometimes can't boot after flashing the firmware

I have experienced the same issue and don't have a clear explanation either. Do you also see two red LEDs in this case? I have two possible outcomes after a flash: - Either only the NRF51 LED only turns on (bottom left blue LED) and all the others are turned off, I assume the STM32 can't even boot....
by MadeInPierre
Thu Oct 10, 2019 1:27 pm
Forum: Developer Discussions
Topic: Crazyflie sometimes can't boot after flashing the firmware
Replies: 7
Views: 3631

Crazyflie sometimes can't boot after flashing the firmware

Hi all, I am currently modifying the crazyflie firmware for my own use case, and I use the regular `make cload` command to flash the crazyflie. The problem I am experiencing is that the drone sometimes fails to boot after flashing the firmware, even though the same code runs on another drone or on t...
by MadeInPierre
Thu Sep 05, 2019 2:34 pm
Forum: General discussions
Topic: Crazyflie 2.1 External antenna compatibility
Replies: 1
Views: 1596

Crazyflie 2.1 External antenna compatibility

Hi all, I am interested in using an external antenna with the CF2.1 by using the onboard uFL connector (I need to use the RSSI signal quality estimator for a research project, and the value changes too much when the drone's angle varies, because of the location of the included antenna that can easil...