Bitcraze Forums

Re first question, yes, both LEDs are slowly blinking. Re second question, what I am trying to do is an OA firmware update via the cfloader. To do so, I enter bootloader mode, were both LEDs (M2 and M3) are blinking in blue. Then, I try to flash he firmware via bin/cfloader flash cf2.bin stm32-fw an...

So.. after some more tests the final conclusion is that the Crazyflie board just receive data but never sends. That's why the green LED 4 is always blinking in green (is receiving info from dongle) but never blinking in red.

Any idea about why is just receiving and never answering?

Many thanks,
Alex

Hi! We just tested what you said and all seems correct but we still can't connect through the OA with Crazyflie PC client. You can find some captures in the link below about the last step when we connect the Crazyflie board through USB in the VM: https://drive.google.com/open?id=1uSKALDkRTIZ_a9LR8pO...

Hi kimberly, The main problem is that all bootloaders seems to work correct and we can enter in bootloader mode but for some reason the radio receiver from Crazyflie board is not working due to that we can't flash the firmware through the radio dongle. Otherwise we can flash the firmware via USB but...

I just repeat the same process with other Crazyflie that is working perfectly and now I neither can't connect through the radio. For sure I'm doing something incorrect but I don't know which thing. Right now I just do the following steps: 1. Install bootloader in STM32 through ST-Link 2. Install NRF...

Hi!,
I just restored to this last commit "Fixes #3: Allow OW write when BLE is active"
Now the power button works correctly but I still have the same problem. I can't connect via radio to Crazyflie board from Crazyflie PC client.

Any other recommendations?

Many thanks!

Good afternoon, Today I try to update NRF firmware through the Bitcraze VM and after updating all repositories I just execute the command make reset_factory in the repository crazyflie2-nrf-firmware. The crazyflie board is connected with the 4 wires to flash NRF through the ST-LINK. After flashing w...