Search found 14 matches
- Thu Dec 16, 2021 8:30 pm
- Forum: AI-deck
- Topic: Problems of using AI-deck and SD-card together
- Replies: 6
- Views: 1579
Re: Problems of using AI-deck and SD-card together
Hi jonasdn, One follow-up. The solution you provided works out. I provide a small summary as follows for others who wants to use ai-deck and sd-card. (1) Hardware side: Disconnect IO4 between CF and sd-card. Connect IO2 (or IO1, IO3) of CF to IO4 on sd-card deck. (2) Software side: change line 81 an...
- Tue Dec 14, 2021 11:49 pm
- Forum: AI-deck
- Topic: Problems of using AI-deck and SD-card together
- Replies: 6
- Views: 1579
Re: Problems of using AI-deck and SD-card together
One more update. I desoldered the IO4 and IO3 on the SD-Card. Instead, I connected the IO2 pin on STM to IO4 pin on SD-card and set the firmware to use IO2 for sd-card CS. Meanwhile, the IO4 pin on CF is only connected to the AI-deck. The figures are attached. However, the same problem still came up...
- Tue Dec 14, 2021 4:55 pm
- Forum: AI-deck
- Topic: Problems of using AI-deck and SD-card together
- Replies: 6
- Views: 1579
Re: Problems of using AI-deck and SD-card together
Hi jonasdn, I tested the method you provide but I encountered an error. I connected IO3 to IO4 on the sd-card and modified in the usddeck.c to use DECK_GPIO_IO3 (shown in the attached figure). The sd-card can log data with only sd-card deck is connected to CF. However, I got an error when I connecte...
- Tue Dec 14, 2021 2:57 pm
- Forum: AI-deck
- Topic: Problems of using AI-deck and SD-card together
- Replies: 6
- Views: 1579
Re: Problems of using AI-deck and SD-card together
Hi jonasdn, Thanks for the reply! My question would be how exactly should I patch the SD-card deck? In the document ( https://www.bitcraze.io/documentation/system/platform/cf2-expansiondecks/#deck-pin-allocation ) it says to connect "via solder bridges or 0 Ohm resistors". Then from my und...
- Tue Dec 14, 2021 3:38 am
- Forum: AI-deck
- Topic: Problems of using AI-deck and SD-card together
- Replies: 6
- Views: 1579
Problems of using AI-deck and SD-card together
Hello AI-deck team, I plan to use AI-deck and SD-card together to collect some data. However, I think there might be some conflicts between the two decks. The problem I encountered when using both decks is as follows. Problem: When attaching AI-deck and SD-card deck, setting the parameter "usd/...
- Tue Dec 14, 2021 1:52 am
- Forum: Developer Discussions
- Topic: On-chip debugging VS-Code Ubuntu 20.04
- Replies: 3
- Views: 1314
Re: On-chip debugging VS-Code Ubuntu 20.04
Hi jonasdn,
Thanks for the reply. The attachment is the screen shot of the arm-none-eabi-gdb and launch.json file.
Thanks for the reply. The attachment is the screen shot of the arm-none-eabi-gdb and launch.json file.
- Wed Dec 08, 2021 3:49 am
- Forum: Developer Discussions
- Topic: On-chip debugging VS-Code Ubuntu 20.04
- Replies: 3
- Views: 1314
On-chip debugging VS-Code Ubuntu 20.04
Hello, I am trying to set up the on-chip debugging in VS-code on Ubuntu 20.04 following the document (https://www.bitcraze.io/documentation/repository/crazyflie-firmware/master/development/openocd_gdb_debugging/) The debugging environment was working perfectly on my Ubuntu 16.04 laptop. However, in ...
- Tue Dec 07, 2021 4:17 pm
- Forum: AI-deck
- Topic: Adjust the focus of ai deck
- Replies: 2
- Views: 749
Re: Adjust the focus of ai deck
I see. Thanks for the reply!
We will try that and see if tuning the focus can improve the image data.
We will try that and see if tuning the focus can improve the image data.
- Tue Dec 07, 2021 5:10 am
- Forum: AI-deck
- Topic: Adjust the focus of ai deck
- Replies: 2
- Views: 749
Adjust the focus of ai deck
Hi,
I plan to use the AI deck to collect some data during flights. Yet I found that the collected images are a bit out of focus.
Is there a way to adjust the focus of the ai deck?
Thanks.
I plan to use the AI deck to collect some data during flights. Yet I found that the collected images are a bit out of focus.
Is there a way to adjust the focus of the ai deck?
Thanks.
- Wed Dec 01, 2021 2:11 am
- Forum: AI-deck
- Topic: AI-deck GAP8 flash issue
- Replies: 4
- Views: 1315
Re: AI-deck GAP8 flash issue
Hi, After reflash several times, the Face detection example is working onboard. For my customized code, I find adding a 5-second delay at the beginning helps to run the flashed code onboard. My suspicion is that there are some conflicts at the initialization which sometimes causes crashes during the...