Search found 20 matches
- Wed Aug 28, 2019 7:48 am
- Forum: Developer Discussions
- Topic: Buffer Error when make cload
- Replies: 4
- Views: 2815
Re: Buffer Error when make cload
For me, pulling the latest version of the client and python libraries and reinstalling them solved this issue!
- Wed Aug 28, 2019 7:43 am
- Forum: Developer discussions
- Topic: reboot from a python program
- Replies: 5
- Views: 7232
Re: reboot from a python program
Thanks! I totally forgot about the cfloader... Only tried it with make cfload. Now I get the same problem as in this thread however: https://forum.bitcraze.io/viewtopic.php?t=3837&p=17662. But I'll post a reply there. EDIT: Just pulled the latest version of both the crazyflie-clients-python and ...
- Tue Aug 27, 2019 3:20 pm
- Forum: Developer discussions
- Topic: reboot from a python program
- Replies: 5
- Views: 7232
Re: reboot from a python program
Hi, very late reply to this old message: My on/off button broke and I tried resetting it to bootloader using this method and it seems to work (blue lights showing). I just cannot update the firmware, since (I guess because you said this in your previous response) the address has changed. As you said...
- Thu Apr 04, 2019 11:48 am
- Forum: General discussions
- Topic: Crazyflie Deck design
- Replies: 10
- Views: 6642
Re: Crazyflie Deck design
Thanks! I will try this this afternoon
- Thu Apr 04, 2019 11:36 am
- Forum: Loco Positioning System
- Topic: Anchor ID's resetting after power-up
- Replies: 6
- Views: 2577
Re: Anchor ID's resetting after power-up
Just wanted to let you know that I stopped Modemmanager and now the problems have stopped (as you expected). So that was most likely the cause of the issue.
Thanks for the support!
Thanks for the support!
- Thu Apr 04, 2019 11:32 am
- Forum: General discussions
- Topic: Crazyflie Deck design
- Replies: 10
- Views: 6642
Re: Crazyflie Deck design
To free UART1, is it necessary to bridge only GS3 and GS4? I am not exactly sure which pads to solder, but it seems like at least GS3 and GS4 should be bridged, I am not sure about GS1 and GS2.
- Wed Apr 03, 2019 11:02 am
- Forum: Loco Positioning System
- Topic: CF2 crashes when in DEBUG mode with Locodeck
- Replies: 4
- Views: 2433
Re: CF2 crashes when in DEBUG mode with Locodeck
As I said in my previous post, the sensorsCalibrated() function that is called by usddeck.c never resolves and the usddeck code hangs there. For some reason the stabilizer.c calls the same function sensorsCalibrated() but this one does resolve (actually a lot of times until, of course, it returns tr...
- Wed Apr 03, 2019 10:50 am
- Forum: Loco Positioning System
- Topic: LOC Node Setup
- Replies: 5
- Views: 3198
Re: LOC Node Setup
Yes, now you can either choose to let the anchors calibrate themselves or change the values of the anchors manually in the screen you show (by clicking on the desired value to be changed). Now they all have a location of 0,0,0.
- Wed Apr 03, 2019 9:43 am
- Forum: Loco Positioning System
- Topic: CF2 crashes when in DEBUG mode with Locodeck
- Replies: 4
- Views: 2433
Re: CF2 crashes when in DEBUG mode with Locodeck
Hmm it seems like that problem was different from that issue, since with a priority of 5 it didn't work even without any other deck. With a priority of 3, it does start nomally with the sd deck attached, but now the SD deck seems to hang after the "wait for sensors" line. It seems like the...
- Wed Apr 03, 2019 8:22 am
- Forum: Loco Positioning System
- Topic: CF2 crashes when in DEBUG mode with Locodeck
- Replies: 4
- Views: 2433
Re: CF2 crashes when in DEBUG mode with Locodeck
I noticed that this does not happen (so it starts normally) when I lower the Locodeck priority from 5 to 3. Not sure if this is helpful in any way.