Search found 14 matches
- Mon Mar 16, 2020 7:20 pm
- Forum: General discussions
- Topic: CF Not Powering On
- Replies: 1
- Views: 2817
CF Not Powering On
Hi All, I've been running some flights today on the Crazyflie and mid way through a flight it powered off and has since not powered back on. I have multiple different batteries and have tried the majority of them; non of which power the CF on. The batteries have been tested with my seconds CF and th...
- Thu Dec 12, 2019 9:20 pm
- Forum: Support
- Topic: Power Options
- Replies: 1
- Views: 2737
Power Options
Hi We are looking to use the Crazyflie 2.0 to represent the use of drones within unmanned airspace over the duration of 8/9 hours a day (for a 4-5 day period) and have some concerns around the battery life. We are wondering if it is possible to supply power directly to the Crazyflie using power cabl...
- Wed Mar 06, 2019 3:25 pm
- Forum: Loco Positioning System
- Topic: [Solved] Errors in RViz and no take-off
- Replies: 4
- Views: 3833
Re: Errors in RViz and no take-off
I checked the URI is correct (it is the same as what works when using the Crazyflie client). After recharging the Crazyflie overnight, I am no longer getting the errors in RViz although I do get a warning that the link quality is low. There are no errors presented in RViz, but the Crazyflie will no...
- Sun Mar 03, 2019 2:49 pm
- Forum: Loco Positioning System
- Topic: Get LPS Node Position via CF2.0
- Replies: 1
- Views: 1552
Get LPS Node Position via CF2.0
Hi, I am looking at getting the positioning of the nodes, via the CF2.0 and as part of a python script, and printing this information. This would help identify that the nodes are correctly assigned and have been identified prior to a script continuing to run. I have spend much time looking around an...
- Mon Feb 25, 2019 10:28 pm
- Forum: Loco Positioning System
- Topic: Assign LPS Node to 'Bootloader' Mode
- Replies: 0
- Views: 4626
Assign LPS Node to 'Bootloader' Mode
Hi, Hardware: 2 x CFs , 6 x LPS Nodes in TDoA3 and 1 x Z-Ranger CF2.0 A = [LPS Tag Deck + Z-Ranger Deck] CF2.0 B = [LPS Tag Deck + One LPS Node] Context I am looking to set the LPS node, as part of CF2.0 B , to 'bootloader' mode during CF2.0 A flight so that I can then fly/move CF2.0 B (with its LPS...
- Fri Feb 15, 2019 4:07 pm
- Forum: Loco Positioning System
- Topic: Flowdeck with LPS? - Need help with position readings
- Replies: 5
- Views: 3644
Re: Flowdeck with LPS? - Need help with position readings
Hi,
Thank you for your response, I have switched to TDoA2 and it has seemed to have improved performance significantly and the LPS Tag remains connected with a z-ranger
Thanks again
Huzayfaa
Thank you for your response, I have switched to TDoA2 and it has seemed to have improved performance significantly and the LPS Tag remains connected with a z-ranger
Thanks again
Huzayfaa
- Fri Feb 08, 2019 11:16 pm
- Forum: Loco Positioning System
- Topic: Flowdeck with LPS? - Need help with position readings
- Replies: 5
- Views: 3644
Re: Flowdeck with LPS? - Need help with position readings
Hi, I am currently working on a project very similar in regards to this matter and and having achieved some what stable and successful flight using LPS (in TWR and 6 nodes) I would like to now make use of the flow deck + LPS deck for further stability. I have spent some time working towards this and...
- Sun Jan 20, 2019 10:18 pm
- Forum: Support
- Topic: [SOLVED] Crazyflie ROS Stack "cmake failure"
- Replies: 2
- Views: 2762
Re: Crazyflie ROS Stack "cmake failure"
Thanks for the prompt reply.
I have followed the updated instructions and have managed to get it working - Thanks!
Regards,
Huzayfaa
I have followed the updated instructions and have managed to get it working - Thanks!
Regards,
Huzayfaa
- Fri Jan 18, 2019 9:58 pm
- Forum: Support
- Topic: [SOLVED] Crazyflie ROS Stack "cmake failure"
- Replies: 2
- Views: 2762
[SOLVED] Crazyflie ROS Stack "cmake failure"
Hi All, I am attempting to setup the crazyfle software on a Linux system running ubuntu 16.04 LTS and ROS Kinetic . As I am quite so unfamiliar with the operating system itself and also ROS, I have therefore done some background research and familiarised myself with the basics. Now, I am utilising o...
- Thu Jan 17, 2019 10:31 pm
- Forum: Loco Positioning System
- Topic: [RESOLVED] TWR to TDoA2 Mode Failure
- Replies: 2
- Views: 2257
Re: TWR to TDoA2 Mode Failure
Hi Arnaud, Thanks for the reply and answers to the questions raised. I had my anchors numbered between the ranges 1 and 6, which once I correct to 0 to 5 fixed the issue I was having. I am now able to successfully switch between all modes (TWR, TDoA2 and TDoA3) using the cfclient. And I'll definitel...