Great, thank you for the quick response.
Am I also on the right track by just reducing the slew, thrust and angle variables I mentioned?
Search found 8 matches
- Wed Jun 05, 2019 9:01 am
- Forum: Technology
- Topic: Simple , Slow Flight for CF2 (Flow Deck)
- Replies: 3
- Views: 14794
- Wed Jun 05, 2019 7:55 am
- Forum: Technology
- Topic: Simple , Slow Flight for CF2 (Flow Deck)
- Replies: 3
- Views: 14794
Simple , Slow Flight for CF2 (Flow Deck)
I have some young nephews who are always interested when they see me flying the CF2. Naturally, they want to take a turn as well but the problem is they have difficulty steering and piloting. My goal is to make the CF as simple and steady as possible, so they can enjoy it also (even if it's very slo...
- Wed Feb 20, 2019 12:57 pm
- Forum: Developer Discussions
- Topic: Forcing Deck Drive Issue
- Replies: 2
- Views: 1608
Re: Forcing Deck Drive Issue
Thanks! Getting rid of the _CF2 did it
- Tue Feb 19, 2019 3:38 pm
- Forum: Developer Discussions
- Topic: Forcing Deck Drive Issue
- Replies: 2
- Views: 1608
Forcing Deck Drive Issue
To start getting more experience with developing, I'm following along this example here that adds a few LEDs to the CF2. However, after flashing the CF2 I still don't see any trace of the new deck. After going through all the steps, the CF client console gives this info: SYS: I am 0x303235363135510F...
- Thu Feb 07, 2019 10:07 am
- Forum: Developer Discussions
- Topic: Providing Power to External Components
- Replies: 2
- Views: 2027
Re: Providing Power to External Components
Hi Arnaud, That's all very helpful. Thanks for laying it out so clearly and explaining the terminology. Yes, I am using 2.0 which sounds like it's even simpler: VCC for < 100mA and VCOM for <1A. Both will go to the shared Ground. With the VCC and the VCOM, it is always on. If I wanted to turn one of...
- Wed Feb 06, 2019 3:55 pm
- Forum: Developer Discussions
- Topic: Providing Power to External Components
- Replies: 2
- Views: 2027
Providing Power to External Components
Hi and thanks for any help you can provide. My question is about the voltage and providing power to a new sensor or motor I may add: From the Power Distribution Section on the Hardware Explained page (https://wiki.bitcraze.io/projects:crazyflie:hardware:explained) From that table: Use the digital su...
- Wed Jan 02, 2019 9:10 pm
- Forum: Developer Discussions
- Topic: Limit on # of Decks?
- Replies: 6
- Views: 3091
Re: Limit on # of Decks?
That's great info, yes very helpful! Thank you very much for taking the time to lay that out , that all makes sense.
- Wed Jan 02, 2019 5:12 pm
- Forum: Developer Discussions
- Topic: Limit on # of Decks?
- Replies: 6
- Views: 3091
Limit on # of Decks?
Hello and thank you in advance for your help! I've been flying and enjoying it and now ready to start toying around with some of the decks. The limits seem endless , but I thought it would be a fun project to have the CF do the following: Detect walls (using the multi-ranger deck and Flow Deck) and ...