We've been working on a custom solution for this for the past few months and its being tested for right now - if there is sufficient interest, we would consider open sourcing the design.
Stay tuned...
Search found 20 matches
- Fri Jan 04, 2019 3:35 pm
- Forum: Developer Discussions
- Topic: Limit on # of Decks?
- Replies: 6
- Views: 3091
- Mon Dec 03, 2018 8:18 pm
- Forum: General discussions
- Topic: Switch type
- Replies: 2
- Views: 1865
- Sat Dec 01, 2018 8:45 pm
- Forum: Autonomous flight
- Topic: Optimum Flow Deck Surface
- Replies: 1
- Views: 2722
Re: Optimum Flow Deck Surface
I kid you not, this is by far THE best solution out there!
We have about 20 of these that we lay out on the floor before we fly.
https://www.ikea.com/us/en/catalog/products/30361910/
We have about 20 of these that we lay out on the floor before we fly.
https://www.ikea.com/us/en/catalog/products/30361910/
- Sat Dec 01, 2018 8:30 pm
- Forum: Autonomous flight
- Topic: Flow Deck Data Collection
- Replies: 5
- Views: 5005
Re: Flow Deck Data Collection
Hey guys,
Is it possible to wirelessly transmit the fused odometry update from the EKF while flying with the flow sensor?
Thanks!
Is it possible to wirelessly transmit the fused odometry update from the EKF while flying with the flow sensor?
Thanks!
- Wed Oct 03, 2018 3:29 pm
- Forum: Developer Discussions
- Topic: make[1]: *** [cf2.elf] Error 1
- Replies: 2
- Views: 2030
Re: make[1]: *** [cf2.elf] Error 1
This is due to an incompatibility issue in the arm toolchain and Ubuntu 18.04. If you've installed the arm toolchain using an apt-get ppa, you have an older version that causes this issue. run arm-none-eabi-gcc --version to find what version you have installed. I've found that upgrading to Version 7...
- Wed Sep 19, 2018 3:00 pm
- Forum: Developer Discussions
- Topic: Crazyflie2 charge current
- Replies: 1
- Views: 1253
Crazyflie2 charge current
Hello all, Is it possible to increase the charge current of the CF2 from 400mA? The BQ24075 seems to support up to 1.5A, and new batteries can be charged at 2C, is there a way to bump it to ~800mA? Seems like enabling this should work - correct? https://github.com/bitcraze/crazyflie2-nrf-firmware/bl...
- Tue Sep 18, 2018 2:52 pm
- Forum: General discussions
- Topic: Flow and LED deck combined?
- Replies: 7
- Views: 4596
Re: Flow and LED deck combined?
Nevermind.... I just saw that IO_2 is NOT used on the flow deck
Even though the schematic shows R4, R5 and R6 connected to IO_2, they are not populated on the boards.
Maybe update the schematic to reflect this?
Even though the schematic shows R4, R5 and R6 connected to IO_2, they are not populated on the boards.
Maybe update the schematic to reflect this?
- Mon Sep 17, 2018 2:46 pm
- Forum: General discussions
- Topic: Flow and LED deck combined?
- Replies: 7
- Views: 4596
Re: Flow and LED deck combined?
Huh... then how does the firmware handle it?
When the drivers for the flow deck and ring deck are enabled, IO_2 is still overloaded in the firmware right?
That is, the ring deck will output a PWM on the line, and the flow deck driver will implement the RESET/MOTION logic?
When the drivers for the flow deck and ring deck are enabled, IO_2 is still overloaded in the firmware right?
That is, the ring deck will output a PWM on the line, and the flow deck driver will implement the RESET/MOTION logic?
- Fri Sep 14, 2018 6:53 pm
- Forum: General discussions
- Topic: Flow and LED deck combined?
- Replies: 7
- Views: 4596
Re: Flow and LED deck combined?
Hmm, that's very interesting! Great article! Operationally, I have a question - the Flow deck uses the LeftExpansion7 (IO_2) pin and so does the LED Deck for the serial data for the WS2812B LEDs (labelled on the schematic as PWM_DOWN). How does that pin overloading work? Images for reference... Flow...
- Fri Jul 20, 2018 8:59 pm
- Forum: Developer Discussions
- Topic: CF2.0 Hardware upgrade
- Replies: 4
- Views: 2555
Re: CF2.0 Hardware upgrade
Hi @arnaud, The redesign I spoke about a few months ago turned out to be successful and we have 25 working robots! Though these are binary compatible with the existing CF2, I am hoping to speak with you guys on how we can make it available to the community. I hope a lot of people will find the redes...