Search found 28 matches
- Tue Nov 12, 2019 4:33 am
- Forum: Support
- Topic: Bigquad - Not Producing PWM values
- Replies: 1
- Views: 1193
Bigquad - Not Producing PWM values
Hey, We have a BigQuad that we have been using. Recently, we replaced some parts for the big drone, but now our BigQuad does not produce a PWM. We manually change the motor parameters in the client, and we don't get any outputs. We get a solid DC output from the signal port (I believe it was a solid...
- Fri Sep 20, 2019 9:41 pm
- Forum: Support
- Topic: BigQuad Unstable - Constantly changing values for roll\pitch
- Replies: 2
- Views: 1891
Re: BigQuad Unstable - Constantly changing values for roll\pitch
Hello ricardo.halfeld, Deeply sorry, we completely rebuild the drone and have been doing work with the smaller crazyflie. We haven't been able to get it any more stable then before. Even with PID tuning we are able to get it to lift but it will lean towards one direction. ANy ideas why that may be t...
- Fri Sep 20, 2019 9:38 pm
- Forum: Support
- Topic: [SOLVED] Bigquad - Expansion Drone Parts Recommendations
- Replies: 3
- Views: 2282
Re: Bigquad - Expansion Drone Parts Recommendations
Hello tobias and whoenig,
Thank you so much. Yeah I can see that there are many options. I looked at the examples and they were very helpful!
Thank you so much. Yeah I can see that there are many options. I looked at the examples and they were very helpful!
- Fri Sep 20, 2019 9:19 pm
- Forum: Support
- Topic: [SOLVED] Making Changes to cflib/positioning/motion_commander.py
- Replies: 3
- Views: 1807
Re: Making Changes to cflib/positioning/motion_commander.py
This totally worked! Thank you.
- Fri Sep 20, 2019 9:19 pm
- Forum: Support
- Topic: Cannot fit three boards
- Replies: 5
- Views: 2377
Re: Cannot fit three boards
Hey r0b0tn1k, Is there a deck on the bottom? It looks like its being stopped from going all the way up. We actually ran into this issue as well since we had a custom deck that was a bit bigger. What we had to end up doing was removing that black part from the pins and individually pushing them throu...
- Fri Sep 20, 2019 9:12 pm
- Forum: Support
- Topic: [SOLVED] 750mAh won't fly - Crazyflie - Flow Deck
- Replies: 3
- Views: 3064
Re: 750mAh won't fly - Crazyflie - Flow Deck
I'm not entirely sure what happened. We also have a crazyflie 2.1 and it was able to take off with the 750mA battery (while the other crazyflie 2.0 was not able to). We are going to take a look at upgrading the motors to something bigger, however we are using the battery because we are trying to pow...
- Sat Aug 10, 2019 6:11 pm
- Forum: Support
- Topic: [SOLVED] 750mAh won't fly - Crazyflie - Flow Deck
- Replies: 3
- Views: 3064
[SOLVED] 750mAh won't fly - Crazyflie - Flow Deck
Hello, So we wanted to increase the flight time of the crazyflie and after reading some of the other posts and blog posts we found that the 750 mAh battery (this one ) worked and got around 16 min of hover time. Now, we got the battery but the crazyflie won't lift off with the flow deck. I was curio...
- Tue Jun 25, 2019 4:31 pm
- Forum: Support
- Topic: [SOLVED] Making Changes to cflib/positioning/motion_commander.py
- Replies: 3
- Views: 1807
Re: Making Changes to cflib/positioning/motion_commander.py
As an update. I've updated the firmware, flashed it with the latest bootloader, and still not able to make any changes.
- Wed Jun 19, 2019 9:13 pm
- Forum: Support
- Topic: [SOLVED] Making Changes to cflib/positioning/motion_commander.py
- Replies: 3
- Views: 1807
[SOLVED] Making Changes to cflib/positioning/motion_commander.py
Hello, It appears that whenever I edit the motion_commander.py, no changes are made when I call it in a different program. Any ideas? For example, if I throw a negative sign in the distance_m value below: def left(self, distance_m, velocity=VELOCITY): """ Go left :param distance_m: th...
- Tue Apr 30, 2019 5:02 am
- Forum: Support
- Topic: [SOLVED] Bigquad - Expansion Drone Parts Recommendations
- Replies: 3
- Views: 2282
[SOLVED] Bigquad - Expansion Drone Parts Recommendations
Hello, I was curious if it would be possible to have some recommendations for parts for the bigquad for expansion (motors, frames, esc/becs, etc) that has been tested and works okay with the bigquad. It seems that the wiki has one that was build, but no part details. link Thank you so much for the h...