We are not clear how to do this step:
2. Change HW ChipSelect. Easiest I think would be to move it (cut trace and solder patch) to IO1 on the flow deck.
Can you elaborate a bit more ?
Search found 11 matches
- Fri Aug 24, 2018 3:22 pm
- Forum: Bitcraze
- Topic: Does the flow deck work on a Big Quad?
- Replies: 10
- Views: 5257
- Thu Aug 16, 2018 7:12 pm
- Forum: Support
- Topic: Reconnect SD card pins to the new SPI port
- Replies: 1
- Views: 1278
Reconnect SD card pins to the new SPI port
Issue: I need the flowdeck and sd-card deck to work together. Currently the official firmware doesn't allow that. shushuai3 has found a way to fix this problem (https://github.com/bitcraze/crazyflie-firmware/issues/270#issuecomment-413371640). However as instructed I still need to "... change t...
- Wed Aug 15, 2018 4:57 pm
- Forum: Bitcraze
- Topic: SD Card Deck and Flow Deck not working together
- Replies: 8
- Views: 4831
Re: SD Card Deck and Flow Deck not working together
Someone found a quick fix on github " ... I change the SD port from spi1 to spi3. After changing the related driver as well as DMA stream, it can log for any long time while flow deck is working ... " Which is good news. However I still haven't managed how to do this in code (i.e change wh...
- Thu Jun 07, 2018 10:40 am
- Forum: Developer Discussions
- Topic: Repair broken battery connector on board
- Replies: 1
- Views: 1249
Repair broken battery connector on board
Hello,
after a crash my battery connector is cut at soldering point. The drone therefore cannot receive power. I'm very inexperienced in electronics stuff, so I would be very glad for some detailed instructions as what to do, what tools do I need.
Thanks all.
after a crash my battery connector is cut at soldering point. The drone therefore cannot receive power. I'm very inexperienced in electronics stuff, so I would be very glad for some detailed instructions as what to do, what tools do I need.
Thanks all.
- Thu Apr 19, 2018 10:35 am
- Forum: Developer Discussions
- Topic: Flowdeck-Functionality
- Replies: 3
- Views: 1828
Re: Flowdeck-Functionality
I suppose the distance to the floor is saved in the ranging log variables ? Here are 8 distances and 8 pressures values measured.
- Thu Apr 19, 2018 10:27 am
- Forum: General discussions
- Topic: Logging custom variables using sdcard
- Replies: 3
- Views: 2484
Re: Logging custom variables using sdcard
So there is not yet the variables to measure linear velocity, but it can be approximated by integrating the linear acceleration right ?
- Fri Apr 06, 2018 11:43 am
- Forum: Developer Discussions
- Topic: Flowdeck-Functionality
- Replies: 3
- Views: 1828
Flowdeck-Functionality
Hello, we are working on a project. Our goal is to build a small autonomous hovering system using the flow deck. To do this we need to understand the impact of flow deck on the original system. What extra information does it deliver that made hovering possible ? And where is this information saved (...
- Fri Apr 06, 2018 11:29 am
- Forum: General discussions
- Topic: Logging custom variables using sdcard
- Replies: 3
- Views: 2484
Logging custom variables using sdcard
I'm trying logging data with micro sd-card deck. Currently I came across these questions (all related to logging on sd card of course) 1/ Is it possible to log custom variables without modifying the firmware ? If so, how to proceed. I looked at the scripts https://github.com/bitcraze/crazyflie-firmw...
- Thu Apr 05, 2018 11:37 am
- Forum: Developer Discussions
- Topic: Controlling with joystick/gamepad using python-client
- Replies: 5
- Views: 2876
Re: Controlling with joystick/gamepad using python-client
I'm studying the joystick input subroutine. The code is easy enough to understand. There is one thing I haven't got though: what is the role of the pysdl2.py file ?
- Wed Apr 04, 2018 2:50 pm
- Forum: Developer Discussions
- Topic: Controlling with joystick/gamepad using python-client
- Replies: 5
- Views: 2876
Re: Controlling with joystick/gamepad using python-client
Hi arnaud,
it I want to study the client code to "copy" the way it handles joystick input, which files should I look into ?
Really appreciate the help.
it I want to study the client code to "copy" the way it handles joystick input, which files should I look into ?
Really appreciate the help.