Hi Arnaud
I finally got a new battery. It's been solved and now it can fly correct at attitude mode.
Thanks
Search found 27 matches
- Tue Nov 20, 2018 1:45 pm
- Forum: Bitcraze
- Topic: Crazyflie2.0 with LED Ring Fly Unstable
- Replies: 3
- Views: 2371
- Tue Nov 20, 2018 11:54 am
- Forum: Bitcraze
- Topic: Crazyflie2.0 with LED Ring Fly Unstable
- Replies: 3
- Views: 2371
Re: Crazyflie2.0 with LED Ring Fly Unstable
Hi Arnaud
Sorry for late reply. I tested it with different batteries. But it flies unstable as well. I have three batteries which are all used for 12 months. I'm not sure is it because the battery quality.
Thanks
Sorry for late reply. I tested it with different batteries. But it flies unstable as well. I have three batteries which are all used for 12 months. I'm not sure is it because the battery quality.
Thanks
- Wed Nov 14, 2018 3:03 am
- Forum: Bitcraze
- Topic: Crazyflie2.0 with LED Ring Fly Unstable
- Replies: 3
- Views: 2371
Crazyflie2.0 with LED Ring Fly Unstable
Hi I was flying my crazyflie2.0 with cfclient, in manually control by xbox joy. Without LED ring, It can fly in orientation mode correct. Later I add the LED ring, it can only takeoff to 30cm from ground, with the largest thrust I gave through joystick. And it becomes harder to control, keep driftin...
- Tue Jul 18, 2017 3:31 pm
- Forum: General discussions
- Topic: Crazyradio connection problem
- Replies: 8
- Views: 11236
Re: Crazyradio connection problem
I use radio with parameters: radio://0/100/2M/E7E7E7E701
- Mon Jul 17, 2017 12:35 pm
- Forum: General discussions
- Topic: Crazyradio connection problem
- Replies: 8
- Views: 11236
Re: Crazyradio connection problem
usb connection is also a possible method. Another problem I met is radio loss. When I put crazyflie within 1m of crazyradio, it can be connected. However, the connection is unstable. Especially when I move the drone further than 2m to crazyradio. It always lost the connection. Is there any way to im...
- Thu Jul 13, 2017 2:44 pm
- Forum: Bitcraze
- Topic: crazyflie2.0 cannot enter DFU mode
- Replies: 6
- Views: 4744
Re: crazyflie2.0 cannot enter DFU mode
Hi Arnaud I entered "crazyflie2-nrf-firmware" and tried to compile NRF51 with make , it shows, arm-none-eabi-gcc -mcpu=cortex-m0 -mthumb -DNRF51 -I Include -I Include/gcc -Iinterface -DRSSI_ACK_PACKET -g3 -O0 -Wall -fsingle-precision-constant -ffast-math -std=gnu11 -DS110=1 -DBLE=1 -DBLE_S...
- Thu Jul 13, 2017 5:13 am
- Forum: General discussions
- Topic: Crazyradio connection problem
- Replies: 8
- Views: 11236
Re: Crazyradio connection problem
It looks like I didn't set crazyflie address correctly.
I checked drone address over usb cable and set the adress to client software. It now can connect to crazyflie !
Just thinking it might be better to have a function to scan drone address automatic.
Thanks
I checked drone address over usb cable and set the adress to client software. It now can connect to crazyflie !
Just thinking it might be better to have a function to scan drone address automatic.
Thanks
- Thu Jul 13, 2017 5:09 am
- Forum: Bitcraze
- Topic: crazyflie2.0 cannot enter DFU mode
- Replies: 6
- Views: 4744
Re: crazyflie2.0 cannot enter DFU mode
Hi Arnaud
There is another problem I'm not sure. How to flash firmware for NRF51 on crazyflie?
I checked the wiki https://wiki.bitcraze.io/doc:crazyflie:dev:starting. But I'm not sure can I flash NRF51 firmware over radiolink? It seems it require SWD cable and looks complex.
Thanks
There is another problem I'm not sure. How to flash firmware for NRF51 on crazyflie?
I checked the wiki https://wiki.bitcraze.io/doc:crazyflie:dev:starting. But I'm not sure can I flash NRF51 firmware over radiolink? It seems it require SWD cable and looks complex.
Thanks
- Thu Jul 13, 2017 5:02 am
- Forum: Bitcraze
- Topic: crazyflie2.0 cannot enter DFU mode
- Replies: 6
- Views: 4744
Re: crazyflie2.0 cannot enter DFU mode
Hi Arnaud
I can flash crazyflie firmware over radio link. Thanks for your help!
I can flash crazyflie firmware over radio link. Thanks for your help!
- Wed Jul 12, 2017 3:18 pm
- Forum: General discussions
- Topic: Crazyradio connection problem
- Replies: 8
- Views: 11236
Re: Crazyradio connection problem
Hi Arnaud When I power on the crazyflie, LED on M1 keep blink in red. After start client, it still cannot found devices. The log showed on terminal is showed as below, xiaohao@go:~/bitcraze/crazyswarm/crazyflie-clients-python$ python3 bin/cfclient INFO:cfclient.gui:Disabling STL printouts INFO:cfcli...