Search found 7 matches
- Mon Apr 10, 2017 10:24 pm
- Forum: Support
- Topic: Crazyradio for Swarm using MOCAP and only the Lib
- Replies: 3
- Views: 4305
Re: Crazyradio for Swarm using MOCAP and only the Lib
Hi Arnaud, Thanks very much for the advice, I changed the URI to use the same channel and data rate, but with a different address and it works very well, however if I add a fourth CF it moves randomly, I also tested by adding another radio and giving other channel to the CFs for that radio and it wo...
- Wed Apr 05, 2017 3:44 pm
- Forum: Developer Discussions
- Topic: Autonomous flight and yaw
- Replies: 2
- Views: 2183
- Wed Apr 05, 2017 3:43 pm
- Forum: Support
- Topic: Crazyradio for Swarm using MOCAP and only the Lib
- Replies: 3
- Views: 4305
Crazyradio for Swarm using MOCAP and only the Lib
Hi, I'm trying to fly a swarm of CFs using a MOCAP system and only the crazyflie-lib-python, everything on Windows. I changed the mode for the CFs to Kalman and I modified the autonomousSequence.py script to support the communication between the CFs and the mocap by using the cf.extpos.send_extpos f...
- Tue Apr 04, 2017 2:50 pm
- Forum: Developer Discussions
- Topic: Autonomous flight and yaw
- Replies: 2
- Views: 2183
Re: Autonomous flight and yaw
Hi Arnaud, I'm sorry about the time that has passed since you post this thread. I found that the real problem was the frame attached to the CF to track the balls in the mocap system. It influenced weight and balance I think. I removed the frame and attached only the little balls and it works very we...
- Fri Mar 10, 2017 3:25 am
- Forum: Developer Discussions
- Topic: OpenCV hover-assist
- Replies: 34
- Views: 20848
Re: OpenCV hover-assist
Hi Arnaud, In the code that I’m using based on the autonomousSequence,py, there is a parameter called Kalman.resetEstimation which allows to reset the used data structures when it take-off as I can understand from the firmware (In fact I’ve been checking the firmware). As I described before I moved ...
- Mon Mar 06, 2017 2:27 pm
- Forum: Developer Discussions
- Topic: OpenCV hover-assist
- Replies: 34
- Views: 20848
Re: OpenCV hover-assist
Hi Arnaud,
Thanks by the reply, I just post a ticket as you suggested (https://github.com/bitcraze/crazyflie-f ... issues/203). I hope this issue can be solved and have a very stable cf. Thanks again.
Thanks by the reply, I just post a ticket as you suggested (https://github.com/bitcraze/crazyflie-f ... issues/203). I hope this issue can be solved and have a very stable cf. Thanks again.
- Fri Mar 03, 2017 6:52 pm
- Forum: Developer Discussions
- Topic: OpenCV hover-assist
- Replies: 34
- Views: 20848
Re: OpenCV hover-assist
Hi Arnaud, I’m using a motion capture system to track the positions of a crazyflie and using the function cf.extpos.send_extpos(x, y, z) as you described before. I compiled the crazyflie firmware with Kalman filter and I used cf.commander.send_setpoint(y_target, x_target,0, int(z_target * 1000)) for...