So frustrating trying to get this PS3 controller working. The above steps do not work for me.
edit: I finally got it working somehow by leaving the MotioninJoy set to Playstation 3 mode and then doing the Configure Device Mapping on the CF Client.
Search found 55 matches
- Fri May 31, 2013 5:49 pm
- Forum: Support
- Topic: [SOLVED]How to get the PS3 controller running
- Replies: 27
- Views: 31566
- Sun May 26, 2013 2:15 pm
- Forum: Support
- Topic: [SOLVED] IMU: HMC5883L I2C connection [FAIL]
- Replies: 3
- Views: 3907
Re: IMU: HMC5883L I2C connection [FAIL]
Do you have the 6-DOF version of the Crazyflie? If so, that would explain it.
- Sat May 25, 2013 8:50 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
Actually, sometimes it's hard to get any reading at all from the D+/- solder joints. Many times, it's not zero but it's not a value either. When I try measuring with my friend's Crazyradio at the D+/- points, the multimeter flashes 1900 then goes to 1. In any case, I've checked the red and black to ...
- Sat May 25, 2013 7:59 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
I tried checking the USB cable (as you and DesTinY suggested) and I think the green and white wires are indeed correct (had to be swapped from their original orientation) for my particular cable. As for checking for a short between D- and D+, if I'm doing it correctly, then I see a reading of 763:
- Sat May 25, 2013 5:38 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
FYI, here's how I setup my multimeter, just in case...
- Sat May 25, 2013 5:36 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
Thanks foosel. That helps and yet I'm still rather clueless as to what to do next, do I measure across each resistor?
- Sat May 25, 2013 2:31 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
Well I have a multimeter, but I wouldn't know how to check for a short circuit exactly.
@DesTinY: I have access to my friend's Crazyradio and it does not behave the same when plugging into my Rasp Pi (i.e. LEDs go out instead of staying on)
@DesTinY: I have access to my friend's Crazyradio and it does not behave the same when plugging into my Rasp Pi (i.e. LEDs go out instead of staying on)
- Thu May 23, 2013 10:00 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
I just tried swapping green and white but still no luck. Still lights up red and green LEDs solid though.
Any other suggestions?
Any other suggestions?
- Tue May 21, 2013 3:09 pm
- Forum: Support
- Topic: Broken Crazyradio USB mount - Is it fixable?
- Replies: 20
- Views: 15344
Re: Broken Crazyradio USB mount - Is it fixable?
So I guess something is really wrong with my board?
- Mon May 20, 2013 3:13 pm
- Forum: Support
- Topic: Raspberry Pi Troubles
- Replies: 46
- Views: 33537
Re: Raspberry Pi Troubles
I finally got it working! By looking in "/tmp/cfheadless.log" I could see the errors. One was that I had changed the default user from "pi" to "skube" but missed changing both instances of "pi" in the cfheadless shell script. The other was I got the error mess...