Looks like this is a one shot wonder (no offence).
I loaded the software on a laptop with Win XP and got to fly for 10 minutes.
Turned it off for a while and now the lap top connects but does not respond to the telemetry.
I'll try the win 7 box again
Search found 8 matches
- Sat Jun 29, 2013 6:37 pm
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
- Sat Jun 29, 2013 1:01 am
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
Re: System startup
Ok. I stopped the client, closing it.
Ate dinner...
Then restarted.
No all I see is the battery voltage (3845mv) but no return values for pitch & roll.
Arrgh
Ate dinner...
Then restarted.
No all I see is the battery voltage (3845mv) but no return values for pitch & roll.
Arrgh
- Fri Jun 28, 2013 11:06 pm
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
Re: System startup
Ok. I unloaded the client, rebooted and reinstalled the client and flashed the quad.
It started right up!
The cat is really unhappy right now. One whap with a quad blade and....
Many thanks guys!
Got to go. Lots of charge left.
It started right up!
The cat is really unhappy right now. One whap with a quad blade and....
Many thanks guys!
Got to go. Lots of charge left.
- Thu Jun 27, 2013 10:15 pm
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
Re: System startup
Ok. (I'm a geek and I am stumped. The PC is windows 7 pro. I deleted the old install and re-installed the client as administrator. I DL'd the firmware and reflashed the processor without verify. Set the radio at 250kbs on channel 10. Closed the client and restarted it. I am still getting the same er...
- Thu Jun 27, 2013 1:06 am
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
Re: System startup
I mapped the controller and saved it. Restarted the software, selecting the controller. I had it set on 1mbs, but moved it down to the 250kbs. I'm still having trouble. It seems like if I get the response back from the crazyflie, I have no control, but if I have control, no access to the crazyflie.....
- Wed Jun 26, 2013 10:23 pm
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
Re: System startup
Sorry this took so long. I start the software and select the controller. Thats good. Select the connection that states Radio. I can see the data leds blink faster, but no response when I tip the copter. The cmd screen states it cant start a timer be cause an older one is running and a lot off error ...
- Tue Jun 25, 2013 1:00 am
- Forum: Support
- Topic: System startup
- Replies: 17
- Views: 17361
System startup
1) Power computer
2) plug in the controller and have it recognised
3) Start the flight program
4) start up the quad.
Seems simple enough, but I am having trouble getting responses back at the PC reliably.
Am I missing something?
2) plug in the controller and have it recognised
3) Start the flight program
4) start up the quad.
Seems simple enough, but I am having trouble getting responses back at the PC reliably.
Am I missing something?
Software?
Where can it be down loaded?