Bitcraze Forums

Hi, Sorry for the late reply. Yes, the whole thing is detachable. I am connecting the Pololu to the VCOM (unregulated power) on pin 9 right hand side (second last pin on the right when you look into the direction of the Crazyflie) and to ground on pin 10 left hand side of the battery holder. I then ...

To conclude this, it was the mini FPV receiver being faulty. The EasyCAP works fine when getting input from the Fatshark goggles. In the end, I changed my FPV setup quite a bit: fpv1.jpg I still use the 1g PAL camera, but for the transmitter I switched to the Tx5810-100 which is much lighter and als...

Hi Fred, Thanks a lot for your recommendations! The FPV setup works fine with Fatshark goggles, so the error is definitely on the receiver side. It must be the EasyCAP or the mini FPV receiver. I didn't have an opportunity yet to try the EasyCAP with other analog input and I could not hook up the ca...

I also have a similar problem. Whenever the crazyflie was working, it was working fine with MPU9250, AK8963 and LPS25H all OK. But every now and then the red LED would start flashing five times and then it would take a lot of effort to get it out of that state again. Switching off and on wouldn't he...

Hi, I'm trying to build an FPV setup similar to the one of Fred: https://forum.bitcraze.io/viewtopic.php?t=1473 I bought the same 1g PAL camera and Altitude RC transmitter and currently power them from an external 1S battery (the Hubsan 380mAh) not attached to the Crazyflie: transmitter.jpg On the r...