Bonsoir
Thanks for the link
i go to buy new one.
https://www.dropbox.com/s/4dajyoaaud157 ... 9.jpg?dl=0
Search found 19 matches
- Fri Jan 23, 2015 9:24 pm
- Forum: Support
- Topic: dfu-util for upgrade
- Replies: 8
- Views: 4741
- Wed Jan 21, 2015 9:16 pm
- Forum: Support
- Topic: dfu-util for upgrade
- Replies: 8
- Views: 4741
Re: dfu-util for upgrade
The result is , i have broken the power button... I have buy some parts last week (propeller,led,expansion board...) and now i can put in the trash ... i have try with a 250 quad Can i use my PA radio with the nrf http://www.amazon.de/gp/product/B00MLSRJ4Y/ref=ox_sc_act_title_1?ie=UTF8&psc=1&...
- Tue Jan 20, 2015 12:37 am
- Forum: Support
- Topic: dfu-util for upgrade
- Replies: 8
- Views: 4741
Re: dfu-util for upgrade
I have already do without battery and also hold the button and power on the cf nothing in lsusb or kern.log If i push on the button again during 3 sec another led tempo is appending and again nothing in lsusb/kern.log (no usb found) I have try with my notebook too, another usb cable but nothing, now...
- Thu Jan 15, 2015 10:26 pm
- Forum: Support
- Topic: dfu-util for upgrade
- Replies: 8
- Views: 4741
Re: dfu-util for upgrade
The usb of my Cf is not recognized anytime. I have try with all procedure
The M2 is blinking always and /var/log/kern.log say nothing
Do i need the SWD/debuger for flashing the CF2 and return to play with it ?
The M2 is blinking always and /var/log/kern.log say nothing
Do i need the SWD/debuger for flashing the CF2 and return to play with it ?
- Mon Jan 12, 2015 12:41 pm
- Forum: Support
- Topic: dfu-util for upgrade
- Replies: 8
- Views: 4741
Re: dfu-util for upgrade
Thanks for your reply
I would like to reflash but
In dmesg or kern.log /lsusb I don't see at any moment the usb of my CF
i have try with 3 tempo and no result
I would like to reflash but
In dmesg or kern.log /lsusb I don't see at any moment the usb of my CF
i have try with 3 tempo and no result
- Sun Jan 11, 2015 7:55 pm
- Forum: Support
- Topic: dfu-util for upgrade
- Replies: 8
- Views: 4741
dfu-util for upgrade
Hello, I have do a mistake sudo dfu-util -d 0483:df11 -a 0 -s 0x08000000 -D cflie.bin I think that i have smashed the nrf The led M2 is alone to blink I can see 3 tempo by pushing differently on the power button I cannot push a new bin because any usb is detected Anyone have an idee to have a correc...
- Sat Jan 10, 2015 5:12 pm
- Forum: Support
- Topic: [SOLVED]Battery connector on the CF broken
- Replies: 12
- Views: 6041
Re: Battery connector on the CF broken
I have buy a new soldering iron with a little tip and the 3rf hand 2x not enough for a big operation.
I have warmed around the ground connector and it's OK
Thanks again !
I have warmed around the ground connector and it's OK
Thanks again !
- Sat Jan 10, 2015 11:41 am
- Forum: Support
- Topic: Windows 8.1 supported by the client ?
- Replies: 7
- Views: 4288
Re: Windows 8.1 supported by the client ?
Can you put a picture of your cf when you try to connect the radio ?
- Sat Jan 10, 2015 1:05 am
- Forum: Support
- Topic: Newbie start, stability problems...
- Replies: 4
- Views: 3133
Re: Newbie start, stability problems...
I think that you have the fine tune your cfclient
make a bit lower your thrust and max angle
play with roll et pitch - and +
make a bit lower your thrust and max angle
play with roll et pitch - and +
- Fri Jan 09, 2015 1:05 am
- Forum: Support
- Topic: [SOLVED]Battery connector on the CF broken
- Replies: 12
- Views: 6041
Re: Battery connector on the CF broken
definitively i need a a magnifying glass with 3rd hand
The M2 still blue
https://www.dropbox.com/s/7obygjs0usa31 ... 1.jpg?dl=0
The M2 still blue
https://www.dropbox.com/s/7obygjs0usa31 ... 1.jpg?dl=0