Bitcraze Forums

Bonsoir

Thanks for the link
i go to buy new one.
https://www.dropbox.com/s/4dajyoaaud157 ... 9.jpg?dl=0

The result is , i have broken the power button... I have buy some parts last week (propeller,led,expansion board...) and now i can put in the trash ... i have try with a 250 quad Can i use my PA radio with the nrf http://www.amazon.de/gp/product/B00MLSRJ4Y/ref=ox_sc_act_title_1?ie=UTF8&psc=1&...

I have already do without battery and also hold the button and power on the cf nothing in lsusb or kern.log If i push on the button again during 3 sec another led tempo is appending and again nothing in lsusb/kern.log (no usb found) I have try with my notebook too, another usb cable but nothing, now...

The usb of my Cf is not recognized anytime. I have try with all procedure
The M2 is blinking always and /var/log/kern.log say nothing

Do i need the SWD/debuger for flashing the CF2 and return to play with it ?

Thanks for your reply

I would like to reflash but
In dmesg or kern.log /lsusb I don't see at any moment the usb of my CF
i have try with 3 tempo and no result

Hello, I have do a mistake sudo dfu-util -d 0483:df11 -a 0 -s 0x08000000 -D cflie.bin I think that i have smashed the nrf The led M2 is alone to blink I can see 3 tempo by pushing differently on the power button I cannot push a new bin because any usb is detected Anyone have an idee to have a correc...

I have buy a new soldering iron with a little tip and the 3rf hand 2x not enough for a big operation.
I have warmed around the ground connector and it's OK

Thanks again !

Can you put a picture of your cf when you try to connect the radio ?

I think that you have the fine tune your cfclient
make a bit lower your thrust and max angle
play with roll et pitch - and +

definitively i need a a magnifying glass with 3rd hand

The M2 still blue
https://www.dropbox.com/s/7obygjs0usa31 ... 1.jpg?dl=0