Super sorry for the late reply been busy with frc.
With it connected to vcom i get the same result- wild tipping forward of the quad but the FPV still works. I have not been able to check it with a multi meter yet but I will as soon as I can borrow one.
Anybody have any other ideas???
Search found 14 matches
- Sat Feb 28, 2015 3:47 am
- Forum: Support
- Topic: Crazyflie 2.0 Tipping forward when fpv added?!
- Replies: 11
- Views: 6766
- Wed Feb 04, 2015 11:11 pm
- Forum: Support
- Topic: Crazyflie 2.0 Tipping forward when fpv added?!
- Replies: 11
- Views: 6766
Re: Crazyflie 2.0 Tipping forward when fpv added?!
Thanks I'll try that stuff on the weekend when I have time and I can borrow a multimeter.
- Mon Feb 02, 2015 12:29 am
- Forum: Support
- Topic: Crazyflie 2.0 Tipping forward when fpv added?!
- Replies: 11
- Views: 6766
Re: Crazyflie 2.0 Tipping forward when fpv added?!
It would be drawing about 95mw.
The IMU is working fine, so thats not the issue...
The IMU is working fine, so thats not the issue...
- Sat Jan 31, 2015 10:26 pm
- Forum: Support
- Topic: [SOLVED] CF 2.0 drifts like crazy
- Replies: 3
- Views: 2718
Re: CF 2.0 drifts like crazy
Thanks for the response! It ended up being a bad motor on M2 (and I have absolutely no idea what that episode with M4 motor mount was about). Sad, as the CF was just unpacked, but I bought 2 spare ones in addition to the one in the package. So, hopefully now I'll be able to actually start flying :-...
- Sat Jan 31, 2015 9:21 pm
- Forum: Support
- Topic: Crazyflie 2.0 Tipping forward when fpv added?!
- Replies: 11
- Views: 6766
Re: Crazyflie 2.0 Tipping forward when fpv added?!
Ok, so here are some photos I took of the circuit, along with my shitty unskilled "circuit diagram" :o EDIT: Probably should link to the set. They shipped a slightly different transmitter to the one listed, so thats why my wiring is different. How its connected to the flie: flie.jpg The St...
- Sat Jan 31, 2015 7:51 am
- Forum: Support
- Topic: Crazyflie 2.0 Tipping forward when fpv added?!
- Replies: 11
- Views: 6766
Crazyflie 2.0 Tipping forward when fpv added?!
Hey guys, So today I got around to soldering together the fpv system that I bought for my CF2, similar to owmdunkley's setup. I am pleased to report its working great, with 0 noise or anything, even when the motors are on 100% ;) The only thing is that when I throttle up the motors and try to acuall...
- Thu Jan 15, 2015 7:38 am
- Forum: Support
- Topic: [SOLVED] Flashing Crazyflie Firmware
- Replies: 9
- Views: 8500
Re: Flashing Crazyflie Firmware
Thanks Chad, I forgot I had to put the flie in bootloader mode *facepalm*.
- Wed Jan 14, 2015 3:51 pm
- Forum: Support
- Topic: [SOLVED] Flashing Crazyflie Firmware
- Replies: 9
- Views: 8500
Re: Flashing Crazyflie Firmware
Just got my new crazyradio in the post (I broke my old one) and tried flashing the crazyflie with it using the vm 0.6, but it still doesn't work, even after updating the repos. Here are the errors: 16:47:41 **** Build of configuration Default for project crazyflie2-stm-bootloader **** make flash ope...
- Sat Dec 27, 2014 5:21 pm
- Forum: Support
- Topic: WORD OF WARNING: Crazyradio Delicate
- Replies: 0
- Views: 1961
WORD OF WARNING: Crazyradio Delicate
This is entirely my fault, but just a word of warning to anybody reading this... So I was flying my crazyflie with my laptop using the crazyradio and someone was coming in the room. My laptop was on the floor, so I moved it to the side so that the person could pass. As I was moving it, the crazyradi...
- Fri Dec 26, 2014 11:39 am
- Forum: Support
- Topic: [SOLVED] Flashing Crazyflie Firmware
- Replies: 9
- Views: 8500
Re: Flashing Crazyflie Firmware
Oh I didn't know that. The reason that I haven't been using 0.6 is that I can't download it- when I click on any of the links (torrent or direct) I just get Welcome to nginx!. Is that an access problem???tobias wrote:We just released WM 0.6. I don't think it works in 0.5 without a lot of modifications.